View source for Akurate DSM /0 (2011 Variant)

{{HIDE_PAGE_TITLE}} {{:Tab-Dropdown:Akurate_DSM_variants}}
{{Title_Text | AKURATE DSM<br>(Original version)}}

[[Image:AkurateKontrolFrontTop.jpg|right|350px]]

== '''Product info''' ==
{{:Product Information:AKURATE DSM0}}

{{:Features:AKURATE DSM0}}
<!--{{Upgrades:HDMI+SURROUND}}--->
{{Upgrades:HDMI+UTOPIK}}

== '''Support''' ==

[http://www.linn.co.uk/support Linn Support Site]

== '''Latest software''' ==

{{General:Latest_Product_SW}}

== '''Manuals''' ==

[http://small.linncdn.com/product-catalogue/documents/Linn_Akurate_DSM_Quickstart.pdf Quickstart Guide]

{{General:Product_Manuals}}

<!--
== HDMI Setup ==

[[HDMI Setup]]

[[DSM Audio Latencies Explained]]
--->

== '''Network Setup''' ==

{{General:DS_Network_system}}

== '''Back Panel Connections''' ==

[[Image:Akurate_DSM_rear2.jpg|center|700px]]

# '''MAINS INPUT''' - To connect to the mains electricity supply.
# {{link:FALLBACK}}
# '''ETHERNET''' - To connect to a network.
# '''ANALOGUE INPUTS''' (XLR, line level) - To connect sources with balanced (XLR) outputs.<sup>2</sup>
# '''ANALOGUE INPUTS''' (RCA, phono/line level) - To connect a turntable or line level source <sup>3</sup> with unbalanced (RCA) outputs<sup>1</sup>+<sup>2</sup>.  (Default MC phono)
# '''PHONO GROUND''' - To connect to a turntable grounding terminal. 
# '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<sup>2</sup>
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
# '''DIGITAL INPUTS''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.
# '''DIGITAL OUTPUT''' (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
# [[HDMI|<u>'''HDMI INPUTS'''</u>]]- To connect sources with HDMI outputs.
# [[HDMI|<u>'''HDMI OUTPUT'''</u>]] - To connect to a display device with HDMI inputs.
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.

<br>
'''<sup>1</sup>''' Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.<br>
'''<sup>2</sup>''' Analogue inputs (including front panel AUX IN),  can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs.<br>
'''<sup>3</sup>''' This input can be adjusted for different Phono stages or Line level by reconfiguring a circuit board within the Linn DS. 

<br>

== '''Front Panel Connections''' ==

[[Image:Akurate_DSM_front.jpg|center|750px]]

# '''MUTE BUTTON''' - Mutes/unmutes the audio
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down 
# '''SOURCE SELECT BUTTONS''' - Changes to the previous/next source
# '''SLEEP BUTTON''' - Brings the unit in/out of sleep mode
# '''FRONT PANEL DISPLAY'''
# '''HEADPHONE OUTPUT''' - To connect to stereo headphones with a 3.5mm input
# '''AUX SOURCE INPUT''' - To connect to a stereo audio source with a 3.5mm output <sup>2</sup>
# '''POWER SWITCH'''- Switches the power on/off

<br>

== '''Installation''' ==

Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]

* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]


==<b>Front display information</b>==
{{Info:Front_Panel_icons}}

==FEATURES==
{{Info:Streaming_Services}}


== '''FAQ's''' ==
Check:
:* [[FAQ-Linn DS/DSM|'''<u>FAQ-Linn DS/DSM</u>''']] 
:* [[FAQ-Linn_DS/DSM#Akurate_DS.2FDSM|'''<u>FAQ-Akurate DS/DSM</u>''']]

== <b>Technical Specification</b> ==
{{:Technical_Specification:Akurate DSM/0}}

For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages
[[Category:Linn_DSM]] [[Category:Family: Akurate]]
[[Category:CORE1]] [[Category:UTOPIK Upgrade]]