Savant Control profile FAQs
Savant Selekt DSM profile
- V1.1 released April 2022 (downloadable from > HERE < )
- You can configure the Savant profile to match the cartridge configuration of the Linn Selekt DSM (IP):
- This includes the addition of
- Selekt HDMI Switch card
- Slot 1, 2 and 3 configuration.
- > All 3 slots allow you to select 2Ch LINE OUT, POWER OUT and SUB + SPEAKER OUT modules.
- > Slot 1 is the only slot, you can group all 3 slots to make it surround sound. Use the SURROUND LINE OUT or SURROUND POWER OUT module to group 3 slots together and form it as surround sound.
- This includes the addition of
- This device will generate an AM Radio service for the internal Network Radio service and provide seek functionality
Components
Recommend that the Linn Selekt DSM has a MAC Address reservation on the DHCP server to maintain the same IP address for this installation.
![Racepoint-Blueprint Selekt.png](/wiki/images/thumb/0/01/Racepoint-Blueprint_Selekt.png/800px-Racepoint-Blueprint_Selekt.png)
Slots
Change the "Slots" content to allow you to configure the Savant driver to match the Selekt DSM setup with
- HDMI card, Power Amplifier and Line modules;
![Inspector.png](/wiki/images/e/e3/Inspector.png)