DS & REM 019
Contents
Linn Remote Control Handset Operation with Linn DS
The following functionality is available on all Linn DS devices with Infra-Red (IR) controllability. If IR is not currently enabled on the Linn DS then this can be done via Linn Konfig.
Enable IR on the Linn DS
- Open Linn Konfig.
- Select the Linn DS.
- Select the Configuration tab.
- Set Handset Commands Accepted to All, Dvd or Cd depending on user requirement.
Configure the Linn Remote Control Handset to work with the Linn DS
The Line Remote Control Handset should be configured for DVD commands or CD commands depending on user requirement.
- Press
to enable DVD commands. - Press
then to enable CD commands.
1) Playlist Source
The Linn Remote Control Handset will be able to access any playlist that is currently loaded onto the Linn DS via a Linn compliant control point.
The playlist will remain loaded on the Linn DS until it is cleared via a Linn compliant control point or if the Linn DS is power cycled or the reboot command is selected from Konfig.
Ensure that the Linn Remote Control Handset is configured to work with the Linn DS ..here
Playing music from the Playlist source
- Load a playlist onto the Linn DS via a Linn compliant control point.
- Press
to select the Playlist source. - Press
to play music from the playlist.
Direct track selection using numerical keys
- Load a playlist onto the Linn DS via a Linn compliant control point .
- Press any of the numerical keys to select the corresponding track.
- To enter a track number in double figures simply press the required numbers in succession.
- Once a track number is entered after 2 seconds it will be selected.
- Press
after the track number is entered to immediately select the track. - Press
to erase the digit if the wrong number is entered.
- Press
for fast search forward or 
for fast search backwards. - Press
for next track selection or 
for previous track selection.
Stopping or pausing the music
- Press
to stop the music playing. - Press
to pause the music.
2) Radio Source
The Linn Remote Control Handset can be used to access the Radio Source through the Linn DS.
When listening to the Radio Source a good quality Internet connection is required.
By default the Linn DS presets will be set to the Linn provided Worldwide account.
Ensure that the Linn Remote Control Handset is configured to work with the Linn DS ..here
Playing audio and preset selection from the Radio source
- Press
to select the Radio source. - Press any of the numerical keys to select the corresponding preset.
- To enter a preset number in double figures simply press the required numbers in succession.
- Once a preset number is entered after 2 seconds it will be selected.
- Press after the preset number is entered to immediately select the preset.
- Pressto erase the digit if the wrong number is entered.
- Press for next preset selection or for previous preset selection.
Stopping or re-selecting audio from the preset
- Press or to stop audio from the preset.
- Press to re-select the preset.
