Difference between revisions of "Sneaky DSM"
(→Speaker Wiring) |
(→Speaker Wiring) |
||
| Line 112: | Line 112: | ||
2+ -> Not Connected | 2+ -> Not Connected | ||
2- -> Not Connected | 2- -> Not Connected | ||
| − | + | <br> | |
The '''bi-amped mode''' is best suited to connecting to passive two-way speakers. | The '''bi-amped mode''' is best suited to connecting to passive two-way speakers. | ||
[[Image:NeutrikConnector.png|left|100px]] | [[Image:NeutrikConnector.png|left|100px]] | ||
Revision as of 13:23, 11 February 2013
Contents
Product info
- Product Name: Sneaky DSM
- Date of Introduction: February 2012
- Type: Integrated digital music player, pre-amplifier, and power amplifier
- Dimensions: 350 mm (width) x 54.5 mm (height) x 215 mm (depth)
- Features
Support
Latest software
Manuals
HDMI Setup
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- FALLBACK- To put the device into Fallback mode (used when reprogramming).
- ETHERNET - To connect to a network.
- HDMI OUTPUT - To connect to a display device with HDMI inputs.
- HDMI INPUTS (3) - To connect sources with HDMI outputs.
- ANALOGUE OUTPUT (RCA, variable/fixed level) - To connect to subwoofer or external power amplifier (or pre amplifier when internal volume control is disabled, this will also disable the internal Power amplifier/speaker outputs) with unbalanced (RCA) analogue inputs.
- DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.
- DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
- ANALOGUE INPUT (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
- SPEAKER OUTPUTS - To connect to loudspeakers, Neutrik 4 pole connector
Front Panel Connections
The front slot contains the IR sensor and the Standby LED
STANDBY LED FUNCTIONS
|
DIM/OFF indicates |
BRIGHT/ON indicates |
Slow Flash |
Fast Flash |
| Device in standby | Device active (will also pulse on IR command received) | Searching for IP address (boot) | Fallback (reprogramme) |
Speaker Wiring
The Sneaky DSM has 4 DAC channels and 4 Power Amplifiers. These amplifiers can be configured in stereo mode or bi-amped mode (via Konfig). All speaker outputs (and Analogue Output) share the same common Volume control. Power output is 50W/channel.
Connections to the speakers are made via Neutrik Speakon connectors, NL4FX. Neutrik Speakon Assembly Instructions
The stereo mode is best suited to connecting to passive one-way speakers.
1+ -> Speaker + 1- -> Speaker - 2+ -> Not Connected 2- -> Not Connected
The bi-amped mode is best suited to connecting to passive two-way speakers.
1+ -> Speaker 1+ 1- -> Speaker 1- 2+ -> Speaker 2+ 2- -> Speaker 2-
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
For further assistance, try our customer support pages or the Linn Forum.
