Difference between revisions of "Manage Systems"
m (→GENERAL) |
m (→GENERAL) |
||
Line 73: | Line 73: | ||
<br><br><br><br><br> | <br><br><br><br><br> | ||
− | + | ====START-UP MODE==== | |
:A number of different settings can be applied to customise the way your device starts up | :A number of different settings can be applied to customise the way your device starts up | ||
− | + | ====Startup Mode==== | |
:Normally your device will power up in '''Sleep''' (aka standby). | :Normally your device will power up in '''Sleep''' (aka standby). | ||
:Select '''Active''' to skip sleep mode and go straight to playback mode on power up | :Select '''Active''' to skip sleep mode and go straight to playback mode on power up | ||
− | + | ====Auto Play==== | |
:Normally you must press play to start playing audio. | :Normally you must press play to start playing audio. | ||
:Change this setting to '''On''' to make your device play audio immediately when a source is selected (only relevant to Playlist, Radio, and Songcast) | :Change this setting to '''On''' to make your device play audio immediately when a source is selected (only relevant to Playlist, Radio, and Songcast) | ||
− | + | ====Startup Source==== | |
:Normally your device will startup on the last source you were listening to. # | :Normally your device will startup on the last source you were listening to. # | ||
:You can change this setting to make sure the device starts up on a specific source instead | :You can change this setting to make sure the device starts up on a specific source instead | ||
− | + | ====Wi-fi==== | |
: If applicable to you Linn DSM this will enable or disable the WIfi operation of your Linn DSM. | : If applicable to you Linn DSM this will enable or disable the WIfi operation of your Linn DSM. | ||
:;Note: If you have a cable/LAN connection to your Linn DSM when first powered on, then the Wifi connection will be ignored. To use the Wifi connection disconnect any LAN connections and power cycle the Linn DSM. This will the use the Wifi connection. (It will have configured for you Wifi first. Check your product page in this wiki for more information) | :;Note: If you have a cable/LAN connection to your Linn DSM when first powered on, then the Wifi connection will be ignored. To use the Wifi connection disconnect any LAN connections and power cycle the Linn DSM. This will the use the Wifi connection. (It will have configured for you Wifi first. Check your product page in this wiki for more information) | ||
− | + | ====IPv6==== | |
: If applicable to your Linn DSM this switch the network operation to IPv6. (It makes no difference in the sound qaulity, It is only to support evolving ethernet networks). | : If applicable to your Linn DSM this switch the network operation to IPv6. (It makes no difference in the sound qaulity, It is only to support evolving ethernet networks). | ||
− | + | ====Bluetooth==== | |
: If applicable to you Linn DSM this will allow your Linn DSM to <B><U><i>receive</i></u></b> bluetooth audio. This can be from you phone, Alexa etc | : If applicable to you Linn DSM this will allow your Linn DSM to <B><U><i>receive</i></u></b> bluetooth audio. This can be from you phone, Alexa etc | ||
:;Note: It will have paired with your Bluetooth device first. Check your product page in this wiki for more information | :;Note: It will have paired with your Bluetooth device first. Check your product page in this wiki for more information | ||
− | + | ====Analog Input Mode==== | |
: This is for the [[Majik_DSM_/4_(2020_Variant) | <u>Majik DSM (2020 variant)</u>]]. This allows the Analogue input to be configured as a [[Cables_%26_terminations#RCA.2FPhono|<u>Line-level input</u>]], or for a Moving Magnet turntable cartridge. | : This is for the [[Majik_DSM_/4_(2020_Variant) | <u>Majik DSM (2020 variant)</u>]]. This allows the Analogue input to be configured as a [[Cables_%26_terminations#RCA.2FPhono|<u>Line-level input</u>]], or for a Moving Magnet turntable cartridge. | ||
Revision as of 14:26, 6 September 2022
Kloud Konfig / Cloud Management / Manage systems
Contents
- 1 Introduction
- 2 Installation
- 3 Operation
- 3.1 GENERAL
- 3.2 SPACE
- 3.3 DISPLAY
- 3.4 SOURCES
- 3.5 MUSIC
- 3.6 DOLBY/DTS
- 3.7 OUTPUTS
- 3.8 VOLUME
- 3.9 PRIVACY
- 3.10 REMOTE CONTROL
- 3.11 HDMI
- 3.12 ADVANCED
- 3.13 DEVELOPER
- 4 SHARING KONTROL
- 5 FAQ's
Introduction
The Linn Manage systems/Kloud Konfig, will allow you to setup and re-Konfigure you Linn DS/DSM from a webpage. This can work in conjunction with the Linn Konfig app with the exception of Space Optimisation.
The options are only a summary what MAY be available on your Linn DS/DSM. (Due to software improvements and hardware improvements these may change at any time.)
Installation
Linn Account creation and adding/removing Linn DS/DSM from your accountThe Linn Account Manage system requires your Linn DS/DSM to be attached to a “Linn Account”. You can do this by using the Linn App:
In Linn App login into your Linn Account
1. Make sure that you are on the same ethernet network as your Linn products. (In other words, make sure that you can see your Linn Products in the Linn App) 3. After you check you are logged in
4. Complete
Accessing the Linn DS/DSM in your accountAfter adding the Linn DS/DSM players to your Linn Account:
Note: If you have any issues logging in to your Linn Account, check your web-browser doesn't have some security/privacy blockers such as "Ghostery, uBlock etc. These "security or Privacy" apps can block the communication is allow login. |
Operation
When you first open the Manage systems page you will be give a list of Rooms assigned to your account.
Click on EDIT SETTINGS or the room picture to Konfigure this room.
If the Linn DS has mains power and has internet access then this Linn DS/DSM will be shown "Status: Online"
GENERAL
DEVICESNetwork Player
Change Configuration
Speaker
Select Mode
Selekt Speaker
Confirmation Selection
Volume OffsetsThis allows you to trim the channels. Hit the Play button against each channel (marked in RED) and adjust the channel trim level.
START-UP MODE
Startup Mode
Auto Play
Startup Source
Wi-fi
IPv6
Bluetooth
Analog Input Mode
|
SPACE
This tab will only appear if you have speakers assigned in the GENERAL tab. |
DISPLAY
The options are only a review what MAY be available on your Linn DS/DSM.
|
SOURCES
This section will allow to rename the inputs and make the inputs invisible. These Source are dependant on the model of Linn DS/DSM. Click on the icon to make the input invisible from the front panel selection and the Kazoo app.
|
MUSIC
This section is to define the desired audio quality from the streaming services. (Internet radio streams). Spotify Audio QualityWithin the Konfig app and Linn Account Manage systems section you can change the audio quality of Spotify.
Tidal Audio QualityWithin the Konfig app and Linn Account Manage systems section you can change the audio quality of Tidal. Options available are:
Qobuz Audio QualityWithin the Konfig app and Linn Account Manage Systems section you can change the audio quality of Qobuz. Options available are:
Deezer Audio QualityWithin the Konfig app and Linn Account Manage Systems section you can change the audio quality of Deezrer. Options available are:
Note: The highest streaming can also be controlled by your Deezer plan subscription and may only limit you to Standard(128 kbit/s) on the standard service.
CALM RADIOSwitch this ON to enable Calm Radio in the MUSIC tab
Radio Presets Provider ( TuneIn / airable )
TUNEIN RADIO
|
DOLBY/DTS
Decode Mode
Dynamic range compression
Speaker DistancesEnter the distance from your main listening position to each configured speaker. These manual settings are only available and applied with Space Optimisation disabled.
|
OUTPUTS
The options are only a review what MAY be available on your Linn DS/DSM. DIGITAL OUTPUT MODE
Analogue outputWhen Exakt speakers are setup on this Exakt DSM then the analogue output is disabled as this audio will NOT be in sync with the Exakt audio. If you want to have both analogue and Exakt front L/R outputs this must be enabled. (Default: DISABLED) SPDIF ModeOn some products an SPDIF socket can configured for an Output, instead of the default Input. This Input or Output mode is set here. |
VOLUME
The options are only a review what MAY be available on your Linn DS/DSM.
Note: Volume 80 is unity gain, (what comes in goes out) any higher volume may distort the audio.
|
PRIVACY
Send Anonymous Usage Stats Enable to allow your Linn DS/DSM to send usage data to Linn. This will help us decide where to allocate time for new features or improvements.
NOTE: No personal information is sent to Linn as a result of this option being checked.
Send Crash Reports Enable to allow your Linn DS/DSM to send crash data to Linn in the event of a failure. This will help us in diagnosing and fixing existing issues. This is used by the Linn Helpline and Service department to check and what has caused the Linn DS/DSM to reboot itself.
If you select No this makes it more difficult to help diagnose remotely what has happened to your product.
NOTE: No personal information is sent to Linn as a result of this option being checked.
REMOTE CONTROL
BUTTONS This is for use with the REM020 Remote control and select which button on this remote control will select which source.
|
HDMI
The options are only a review what MAY be available on your Linn DS/DSM. All Linn DSM with HDMI input socketsHDMI
"HDMI 2.0"/"ARC only" ProductsTurn HDMI Off in Sleep
|
ADVANCED
The options are only a review what MAY be available on your Linn DS/DSM.
REAR LEDS
SONGCAST
Protocol
REMOVE MUSIC SYSTEMThis will remove the Linn DS/DSM from your Linn Account and allow to be attached to another Linn Account.
|
DEVELOPER
Ignore this section, this is for software development.
SHARING KONTROL
You can share your Linn DS/DSM to another Linn-Account. This can be used for Retailers to give remote support for their customers. This is done by the customer granting access to the Retailer, or vice-versa. But note that if the Linn DS/DSM is reset to Factory Defaults <RESTORE>, this action will remove the Linn DS/DSM from ALL Linn accounts.
- Click on the and select
- SHARE CONTROL with another Linn Account.
- Add the Linn Account emails and your name to the other Linn account.
- You can choose to share this linn DS/DSM for a limited time 12hours/48hours or forever-Indefinite. Or until the Linn DS/DSM has a factory reset-RESTORE.
- You can also share control of this Linn DS/DSM with other Linn Accounts by repeating the SHARE CONTROL button and each time stating a new Linn Account
- REMOVE: to remove this Linn DS/DSM from your Linn Account.
- MANAGE ACCESS: If you have shared your Linn DS/DSM with another Linn Account(s) then you can selectively REVOKE/remove these Accounts access to your Linn DS/DSM.
- END ACCESS: If you have been granted access to another Linn-Accounts Linn DS/DSM you can remove access from you Linn Account
- SHARE CONTROL with another Linn Account.
- Click on the and select
- Signifie that this Linn DS/DSM has shared control by more than one Linn Account. If shared TO this account then it states who has shared it.
- In the example below:
- Merlin Kustom DSM: is linked to the current Linn Account only
- Merlin Lounge: is linked to the current Linn Account AND SHARED with another Linn Account. You can shared this to multiple Linn Accounts and well as be removed from other Linn Account(s).Or finally remove this Linn DS/DSM from your account.
- TV Room: has been SHARED with this Linn Account. This only has the option to return full Konfiguration to the original Linn Account
FAQ's
My Linn DS/DSM will only shows offline even though it is power on
This can be caused by a loss of internet access on the Linn DS/DSM.
Try the following:
- Power cycle the Linn DS/DSM. That is, remove mains power from the Linn DS/DSM for a minimum of 30seconds and reapply mains.
- Wait for approx 5minutes for the Linn DS/DSM to power on and do house-keeping.
- On the manage systems web-browser press F5 ot SHFT-F5 to refresh screen.
How do I remove a Linn DS/DSM from my Linn Account
There are THREE ways to do this:
1. If you are on the same network as the Linn DS/DSM then:
- a) go into Kazoo Settings > Linn Account and log in to the Linn Account that currently has the Linn DS/DSM
- b) This will give a list of Linn DS/DSM on this network and REMOVE the required Linn DS/DSM.
- c) Complete
2. If you do not have access the Linn Account that the Linn DS/DSM is linked to:
- a) Open Konfig
- b) Goto the ADVANCED tab
- c) Select the Linn DS/DSM to be unlinked from the Linn Account and hit the <RESTORE>. This will do a factory reset on the Linn DS/DSM and remove this from the Linn Account.
3. If the Linn DS powered off and is on your Linn Account and you want unlink it from your Account:
- a) Open Manage account
- b) Select the Linn DS/DSM you want to remove. If the room is OFF (that is, no mains power), the web-page will state that the Room is offline. This page will also give you the option to REMOVE MUSIC ROOM. Select this option to unlink this Linn DS/DSM from your Linn Account.