Urika II

From LinnDocs
Revision as of 08:13, 5 February 2018 by Yoda (talk | contribs) (EXAKT STATUS INDICATORS)
Jump to: navigation, search
Urika II side view 700px.jpg

Product info

  • Product Name: Urika II
  • Date of Introduction: Jan 2018
  • Type: MC Phono Stage using Exakt technology
For use with Linn DS/DSM with Exakt sockets

Features

  • Moving coil (MC) internal phono stage for LP12
  • The most precise implementation of the RIAA curve
  • Converts music signal to digital at the earliest point possible
  • Lossless digital output over Exakt Link
  • Component manufacturing tolerances measured and corrected
  • Optimised for your chosen cartridge
  • TOSLINK digital output

Support

Linn Support Site


Manuals

Turntable Maintenance

Safety Information

Warranty Terms and Conditions

Back Panel Connections

Urika II Connections.jpg


  1. RADIKAL INPUT - For connection to the RADIKAL LP12 motor power supply. 1
  2. EXAKT LINK- For connection of Exakt products (Linn DS/DSM with Exakt sockets/speakers/ExaktBox).
  3. TOSLINK DIGITAL OUTPUT - To connect to an external Digital recording device 2
  4. EARTH GROUND - For connecting the unit to an earthing terminal

1 The RADIKAL will only supply power to the URIKA II when the turntable is rotating.

2 This will provide 192k/24bit PCM stream. Note that this connection cannot be used on its own, the Urika II MUST be used with a Linn DS/DSM with an Exakt-link connection for control and operation


EXAKT LINK connection

Check HERE for information on Exakt link connection


Operation

EXAKT STATUS INDICATORS

Urika II Exakt Status.jpg




Exakt-Link operation

The Urika II requires a Linn DS/DSM with Exakt sockets to pass the audio to the Linn DS/DSM. Playback on the Linn DS/DSM can be from the analogue sockets and/or the Exakt-link to Exakt speakers/Exaktbox.

EXAKT LED Status

LED

OFF

ON

Flash / Blink

0 Master Port No Link Link Discovered Link Activity
1 Audio Clock No Clock Clock locked Clock not locked
2 Slave Port No Link Link Enabled Link Activity
3 Software Status Not Configured Running Hardware Fault
















Trouble shooting

Check Exakt trouble shooting


For further assistance, try our customer support pages or the Linn Forum.