Troubleshooting

From LinnDocs
Revision as of 12:20, 14 October 2011 by Yoda (talk | contribs) (Fault finding)
Jump to: navigation, search

Contents

Some information can also be found in the FAQs section

Fault finding

This to help with the basic fauilt finding of a Linn DS syste,


My IPad locks up when I try and change Rooms on the Kinsky Touch

14th Oct 2011
The release of IOS 5 is causing problems with Kinsky Touch 4.2.2. This is being investigated and a urgent release of Kinsky will be shortly released to fix this issue.

The Linn DS/DSI will only play one track then stop

Make sure that the Linn DS/DSI has the PLAYLIST source selected, NOT the UPnPAV source. The UPnPAV source is available for standard UPnP control devices that do not have the facilty to save the Playlists on the Linn DS itself.

KinskyTouch is not working with iPad/iPhone

Check the iOS is at least version 4 or above (Settings-General-About-Version)
We suggest do a Version update on your iPad/iPhone/iPod device if you have any difficulties with Kinsky Touch

I seem to be getting more music drop-out since changing to Davaar

Audio drop-out on the Linn DS/DSI is caused by the Linn DS/DSI waiting for the streamed data. The Linn DS/DSI has a limited buffer memory to allow small music stream breaks but if the incoming music stream is lost for too long or is not fast enough to feed all of the music stream required for real-time playback, this causes the Linn DS/DSI to MUTE until the the buffer memory is full and can carry on playing again.
With Davaar software there has been no change in the amount of data streamed from your music storage device to the DS, with a very marginal increase in the outgoing network traffic from the Linn DS/DSI to support the Songcast feature. These drop-outs are more likely to be due to media server changes (after a software update, internal maintainance or data corruption in the NAS) or other devices on the network taking up network bandwidth.
We suggest disconnecting any other Ethernet devices not required for the Linn DS/DSI to NAS connection to help track down the cause of music drop-outs. This may mean trying out a Linn tested DHCP/Server with a different UPnP media server (PC instead of NAS running the required software). This will help track down the cause of the ethernet music stream drop-outs.

CANNOT get BBC Radio

BBC is presently changing its broadcast format. Some ISP's can broadcast this, some cannot, plus the BBC are having some other difficulties. check BBC & Digital Radio Tech & BBC Multicast

Cannot see the NAS in Kinsky Desktop/Konfig or shortcuts disappear

Suspect that your PC is running Norton 360. Follow the following link for instructions on how to get this working

iTunes files cannot be added to the Kinsky Desktop playlist

This should only be an issue with Kinsky Desktop V4.1.7 and PC setup for a country that does not use the alpha-numeric character set (like Russia, Japan etc)

The iTunes file shows the Music type in the countries native language and this version (4.1.7) on Kinsky Desktop does not understand this type and will not add the DS Playlist. As a temporary solution (until the next release of Kinsky Desktop) is to add the iTunes library as a folder and select the iTunes files from the folder view or use the nightly build version of Kinsky Desktop.

ALAC files cannot be played on the Linn DS/DSI player

If the ALAC files have been created with a early version of dBpowerAmp or iTunes, these Music files may not be played by the Linn DS/DSI. To recify this, we suggest using dBPowerAmp V14 and above and transcode these from ALAC to ALAC, this will correct the file issue

Internet Radio keeps muting

This is due to breaks in the media stream from the Internet.

This can be due to high network traffic in your area, business first thing monday morning, or heavy useage of video broadcast (like footbal matches).

Some ISP's will also reduce your bandwidth of certain types of network traffic, typically Bittorrant (P2P). Some ISP's will mistake your Radio stream for a Bittorrant and throttle this network traffic and cause muting of your Internet Radio.

I cannot see any AIFF Metadata

TwonkyMedia does not support the AIFF Metadata. Twonky have been asked to add this (Jan 5th 2011) [1]

Konfig 3.10.6 does not work with MAC

Konfig V3.10.6 does not work with Mono V2.8.1_3, you need to use Mono V2.8/1_4 or above.

Suspect this is due to Konfig attempting to use the wrong network adapter. Delete the file ~/.local/share/Konfig/Network.xml and restart Konfig If possible let us have a copy of the file before deleting it Use 'Go To Folder' in finder to access the hidden folder

Failing that check version of mono used - type mono -V' in terminal window - expect version 2.6.4 or higher

Note: This does not effect Kinsky Desktop, only Konfig

Windows Home Server (RipNAS) has audio drop outs

This may be due to the WHS housekeeping check [2]

Since installing CARA6, I cannot see the DS using Kinsky Desktop

As Cara6 has an internet Radio function, it will check the internet for any updates in the Tunein Radio (previously RadioTime) login etc.

If you have a poor or no broadband/internet link, this can cause the DS to appear to be invisible on Kinsky Desktop whilst it is searching for the TuneIn website.

If you leave the DS alone for approximately 3 minutes it will start working as it realises the lack of the Internet.


When playing WMA lossless files, the DS will play the track for so long, then give a white noise (like the sound of waves crashing)

CARA6 does not support WMA lossless Music files. It may appear to play some of the files OK, but others can cause the DS to play Music then give a white noise hiss.

Ripping Music on dBPoweramp does not bring any melody in to the music

Suspect that you haven't got the dBPoweramp ripper setup correctly. We recoomend that you check the dBPoweramp help document on your PC/laptop.


I can only see the Kinsky Desktop icon on the system tray (beside the clock) but not on screen

Suspect the configuration of the Kinsky desktop has been corrupted. this should be deleted.

Windows7/Vista
1. Go in to the Windows Explorer - Folder options.. - Organize - Layout and ensure that "Menu bar" is enabled
2. Change "Hidden files and folders" to "Show hidden files and folders"
3. on the Computer - Users - <user name> - AppData - Local folder
4. Within point-3 folder delete the "Kinsky Desktop" folder
5. Restart Kinsky Desktop and it will ask for the Network connection and then run as normal

Windows XP
1. Go in to the Windows Explorer - Tools - Organize - Layout and ensure that "Menu bar" is enabled
2. Change "Hidden files and folders" to "Show hidden files and folders"
3. on the Computer \Documents and Settings\<user name>\Local Settings\Application Data
4. Within point-3 folder delete the "Kinsky Desktop" folder
5. Restart Kinsky Desktop and it will ask for the Network connection and then run as normal


Norton Antivirus blocking installation of Konfig

Make sure that Konfig is not running. (Use task manager or reboot your PC) then install the latest version of Konfig. You may have to download Konfig from here.

If you get any errors running Konfig, check that the Norton Firewall has an exclusion for the Konfig application

Norton Antivirus now has Konfig as an exception and should no longer block the installation


Kinsky Desktop cannot see the Media-Music library

If your NAS is running Twonky V5, you may be experiencing either the Media library disappearing or not being listed. (Twonky 5 broadcast on a valid IP address and an invalid IP address (127.0.0.1), if the Kinsky desktop tries to access the Music Library on this invalid IP address, no Music will be shown)

Kinsky Desktop V3.3.4 and above has a fix for this. (You may have do download this from our OSS website to get this release of Kinsky Desktop)


Problems updating the Linn DS software.

There may be issues with your network.

  • Restart your network by power cycling the components, starting with the DHCP server/router, then the Linn DS, then the PC.
  • Try updating the software again.


If you still have problems

  • Bring the Linn DS, PC and DHCP server/router to the same location and use short patch leads (<3M, 10ft)
  • Power cycle these products starting with the DHCP server/router, then the Linn DS, then the PC
  • Try updating the software again.


Finally if you still have problems, (this should be done by a Linn Retailer).

Procedure for manual update

I cannot get Album coverart on the KinskyDesktop?

The Kinskydesktop can either get the artwork from the Metadata or from a file within your NAS/Media Server

The on-screen icon will give a better indications:

State 1: The media server is not providing KinskyDesktop with any album art NoAlbumArt.jpg
State 2: KinskyDesktop is currently downloading the artwork Album.jpg
State 3: There was an error downloading the artwork AlbumError.jpg
State 4: Artwork is showing

If you are seeing state 1 then you either dont have artwork for that album or your media server is for some reason not detecting the artwork. Some Media Servers such as Fruppes no not support coverart.

Other media servers do not like the size of the coverart, this should be resizesd to 600x600 pixels.

Check that the folder with the Music files have a coverart picture called "folder.jpg" with a size of 600x600, this will allow generally allow the album view to show the coverart. (Some coverart maybe in the PNG format, this should be opened and resiezed to 600x600, then resaved as folder.jpg)

Some UPnP Media Servers also require the coverart to be embedded within each Music file. This can be done with software such as MediaMonkey, Foobar2000, Tag& Rename etc., after which, rebuild your database to ensure that the UPnP Media server has updated it database


state2 is the Kinsky desktop waiting for your Media server to supply the coverart. These will coverart will be updated in due course.

If you are seeing state 3 then there was some error with downloading the artwork, there will be an entry in your 'Debug Console' (right click on the Kinsky Desktop window and select Tools - debug Window)associated with that bit of artwork and it will give some reason for not being able to download the artwork and the URI to the artwork, hopefully this should help you fix the issue and at the very least try and download the artwork in your browser to see if you media server is providing a valid image!
If you have changed any artwork recently, the UPnP Media server may still be looking for the older original version that no longer exists. We would recommend that you rebuild the Media Database then recheck.
state 4 everything is OK


If you have further problems with this please contact us on the helpline.



Where are the User Manuals for the KinskyDesktop?

There is presently an on-line manual for the in the OSS.Linn.co.uk site for the KinskyDesktop.
Kinsky Desktop

The Jukebox is manual resides in Jukebox

The Konfig manual resides in Konfig

On KinskyDesktop, the operational speed is VERY slow.

On the PC, if you have IntelliPoint drivers installed, then disable ‘Instant Viewer’ in the mouse settings.

The front panel of the DS is showing a flashing dot and I cannot see the Linn DS with KinskyDesktop or Konfig.

Computer networks can get very fussy. If you have any problems getting the Linn DS on an Ethernet network, (dot continuously flashing), try the following options:-
Option1

  1. Power off the EVERYTHING connected to the Ethernet system, (PC, Printers, DS, Routers/DHCP servers).
  2. Leave everything powered off for at least 10seconds.
  3. Switch everything back on.
  4. Retry the system

You will find that some of the devices in the system get confused and cause system confusion. The power cycling will do a reset of the system and recover most issues.

Option2

  1. Use fresh Ethernet cables, (replace existing cables).
  2. If the Linn Ds is more than 3M (10ft) from the DHCP/Server. Move the Linn DS right beside the Router/DHCP server and patch using a short Ethernet cable (1M), the Linn DS to the DHCP server/Router
  3. Retry the system

Option3

  1. Build a totally separate system with only a DHCP/Server and Linn DS.
  2. Retry the system

Some networks only have a limited number of DHCP address’s. if you have already connected some PC’s to this system, your Router/DHCP server can remember these devices, (even though no longer connected) and will not allocated these previously assigned IP addresses to newly connected products. So the case of unplugging one device to free up an IP address for the DS to use will NOT work with most Routers/DHCP servers if there are no free DHCP IP addresses available.

This will give a better idea as to what is causing the problem. (98% of the time, this is due to a local network issue).

I cannot find TWONKY V4.4.* to run the Linn DS products.

If you are running on a Netgear ReadyNAS we recommend that you use the Netgear Forum version of Twonly 5.0.68. See Linn Forum for instrucitons


Twonky have recently changed their website. You can download Twonky from
[ http://www.twonkyforum.com/viewtopic.php?f=2&t=7653 ]


ReadyNAS - Twonky 4.4.17 ot Twonky 5.0.68 (Netgear version)

Note: you buy the Twonky Media SERVER licence, NOT the Twonky Media MANAGER licence.


the Media Server Licence can be purchased from Buy Twonky Service


I cannot see the Linn DS on the LINNGUI/Kinsky Desktop

If the LINNGUI cannot see the DS product, check the following:

1. If your PC has multiple network connections, (wired and wireless-WifI). Disable one of them so you are ONLY using wired ethernet or wireless ethernet. Restart the LINNGUI and check operation. (You can tell your LINNGUI to use one network card in the following link [3]

2. Some Network DHCP servers/switches can block UPnP communication. Either check the router settings or use a ethernet router such as the Netgear RP614 to see if this cures the issue.

3. You may have different Anti-Virus & firewall packages from the Windows default, (such as Norton, McAfee, etc) ensure that these have the above files with exceptions as per their Manual, plus check that they UPnP port operation. [4]

4. Try another control device (PC, PDA, etc), to check the operation of your PC



I can only see some of my Music and the Music keeps pausing

If you are using TwonkyMedia, suspect that the Music Rescan time is too small. The rescan action can take several minutes (>30minutes in large file collections. If you set the Rescan time to be too small, it will start performing another  Rescan before it has finished the first etc, etc, etc.

Ideally the RESCAN time should be set to "0" (zero) and you can create an Internet Desktop shortcut for the URL:

http://your_NAS_IP:8100/rpc/rescan for Netgear ReadyNAS or

http://your_IP:9100/rpc/recan for most other devices

This will tell twonky to only rescan when you have added something new.

Linn Forum reference

If you are running DS with CARA1 software, update to CARA2 firmware. This is performed by running the KONFIG application and select the Update tab, select CARA2 and press the UPDATE button. Complete



On the Kinsky Desktop, the Playlist window constantly states Subscribing

First, make sure that you have the set the Kinsky Desktop to select the DS(Playlist) source. (You cannot add Music to another input)

The Windows Firewall must have both the LinnGUI or LinnConfig application files as files exceptions. When you first install these software applications, you PC will ask if you want to grant this application network access. If you haven’t granted access, you will need to grant access, this can be done with the following link:

i.Check the Firewall settings

For Bute
ii. Add C:\Program Files\Linn Products Ltd\LinnConfig\1.x-0.x\LinnConfig_xxx_rx.exe   &
iii. add C:\Program Files\Linn Products Ltd\LinnGui\1.x-0.x\LinnGUI.exe

For Cara

ii add C:\Program Files\Linn\KinskyDesktop\KinskyDesktop.exe &

iii add c:\Program Files\Linn\Kinsky\Konfig\Konfig_xx_rx.exe


You may have different Anti-Virus & firewall packages from the Windows default, (such as Norton, McAfee, etc) ensure that these have the above files with exceptions as per their Manual, plus checkt that they UPnP port operation. //docs.linn.co.uk/wiki/index.php/FAQs#What_are_the_firewall_settings_required_for_LinnGui.2FLinnConfig_operation (If the Anti-Virus/Firewall does not allow the UPnP port operation, the PC screen will constantly be blank and there is no data gatting back to the software)


I cannot play some of my iTunes files

Downloaded iTune Music is DRM protected, (Digital Rights Management). This will ONLY allow playback on iTunes devices.

These Music files will have the M4P extension. To make these files visible to the DS, the DRM must be stripped off these Music files. (This may be done by iTunes or illegal software).

Contact iTunes on the supply of non-DRM files.


A ripped CD is not showing on the Linn GUI/ Kinsky Desktop

Firstly, ensure that the CD has been ripped to the correct location (e.g. to the NAS and not to the PC).

If that is not the cause, it is possible that the metadata is incorrectly applied, or there is no metadata. Tools like Audioshell, which runs as part of Windows Explorer, will show the file properties including the track metadata.

Metadata is a place holder for the track/album/artist information. It can hold much more info, but it is this minimum information that is required by the media server to enable it to find an album and tracks.

In some cases, the FLAC metadata may be incorrectly applied. One common problem is that FLAC files are wrapped in ID3 tags instead of using the standard FLAC/Vorbis tagging. FLAC with ID3 tags is against the FLAC specification, and early versions of DS players reject these files as invalid. When viewing the metadata from MP3Tag ID3 tags will be shown as "FLAC (FLAC ID3V2)" instead of "FLAC (FLAC)". If this has happened the tag data can be removed using MP3Tag, but you will then have to re-add the correct metadata manually using the same tool. Usually, it will be faster to rip the disc again, but before you do so, ensure the ripping software is correctly configured.


Archive