Difference between revisions of "Template:SystemDesign:Kustom DSM"

From LinnDocs
Jump to: navigation, search
(Created page with "==System Design== ===Kustom DSM operation=== The Kustom DSM Z8 has four Streamers, (Linn DS players) and eight Zones (audio output Volume and Standby). <br> After you have co...")
 
m (→‎Kustom DSM operation)
Line 2: Line 2:
  
 
===Kustom DSM operation===
 
===Kustom DSM operation===
−
The Kustom DSM Z8 has four Streamers, (Linn DS players) and eight Zones (audio output Volume and Standby). <br>
+
;Requirements for Crestron/Control4 operation:
−
After you have configured which Zones associate to which streamer you can use the Linn control App, Control4 and Crestron to the system. These Zone to streamer associations are fixed ONLY via the Konfig app.
+
::Linn Kazoo Server with [[Konfig_Manual#GATEWAY_API | Gateway API]] enabled
−
<br>
 
−
:*When you bring a Zone out of Standby this will also wake up the associated streamer <b>AND ALL other Zones associated with this streamer</b>
 
  
−
:* If you are only going to be using single zones with the occational sharing audio with other zones then we would advise that you only that one Streamer is associated with that single Zone. You can easily Songcast to other zones at your leisure, that waking up that Zone will ONLY wake up that Zone.<br>
+
;Standard operation
−
 
+
:The Streamer / Zone configuration should be reviewed before installation.
−
Multiple Zones should only be associated with a single streamer is you <b><u>always</u></b> want these Zones brought on together.
+
* :When you bring a Zone out of Standby then this automatically bring the Streamer and <b>ALL</b> Konfigured Zones of out of Standby. Therefore ONLY configure Streamer/Zones to Zones that are always connected.
 +
:::E.g with Bedroom and Ensuite the typical scenarion in the morning is to go into Ensuite and switch on the Radio. if the Ensuite Zone and Bedroom Zone share the same Streamer then the Bedroom zone will also play the Radio at it last volume use. This is probably not advised.
 +
:::The solution is to have Streamer1 for the Bedroom and Streamer2 for the Ensuite. If you want to listen to the same Music then these Streamers can easily be Songcasted/Grouped/Networked together.
 +
*: Zones within a Streamer group can be independently muted and the only umuted by either
 +
::*Pressing the Zone Mute button again
 +
::*Bringing the Streamer in to/out of Standby

Revision as of 14:12, 17 January 2020

System Design

Kustom DSM operation

Requirements for Crestron/Control4 operation
Linn Kazoo Server with Gateway API enabled
Standard operation
The Streamer / Zone configuration should be reviewed before installation.
  •  :When you bring a Zone out of Standby then this automatically bring the Streamer and ALL Konfigured Zones of out of Standby. Therefore ONLY configure Streamer/Zones to Zones that are always connected.
E.g with Bedroom and Ensuite the typical scenarion in the morning is to go into Ensuite and switch on the Radio. if the Ensuite Zone and Bedroom Zone share the same Streamer then the Bedroom zone will also play the Radio at it last volume use. This is probably not advised.
The solution is to have Streamer1 for the Bedroom and Streamer2 for the Ensuite. If you want to listen to the same Music then these Streamers can easily be Songcasted/Grouped/Networked together.
  • Zones within a Streamer group can be independently muted and the only umuted by either
  • Pressing the Zone Mute button again
  • Bringing the Streamer in to/out of Standby
Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=Template:SystemDesign:Kustom_DSM&oldid=21969"