Template:ModuleInfo:SELEKT DSM CARTRIDGE - POWER OUT

From LinnDocs
Revision as of 08:17, 26 April 2019 by Yoda (talk | contribs)
Jump to: navigation, search

SELEKT DSM CARTRIDGE - POWER OUT

Linn part#       SK CPA1

This is a module with 2off Power Amplifier channels with4mm/Banana plug terminals.

This module has a standard-level 1 Digital to Analogue Convertor.


Power Amplifier Output:

Bridged Class-D amplifier with post-filter feedback using 4mm/Banana/binding post terminals.
      Max output power:



100W/channel into 4Ω load,


50W / channel into 8Ω load



THD+N: 0.001%
Dynamic Range      110dB
Gain: 20dB

Note:

  • An upgrade to the Selekt Power supply may be requried to use any new modules.
  • Power Amplifier outputs: These are CLASS-D amplifier outputs and speakers should ONLY be connected/disconnected when the product in is Sleep state or powered OFF.
  • Some Electrostatic speakers may require a modification to work with Linn Class-D amplifier. Please refer to the speaker manufacturers website for information.
  • The Selekt power amplfiers have a slightly lower gain than other Linn power amplifiers, (original Majik/Akurate..). If you are going to Bi-Amp a pair of speakers then we would recommend either ALL Selekt Power amplifier cartridges or ALL Selekt Line level cartridges with external amplifiers.
Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=Template:ModuleInfo:SELEKT_DSM_CARTRIDGE_-_POWER_OUT&oldid=18573"