Difference between revisions of "Template:Issues:General Wifi"

From LinnDocs
Jump to: navigation, search
m (General Linn DS/DSM/HIB Wifi)
m (Advise on use)
(4 intermediate revisions by one other user not shown)
Line 1: Line 1:
==General Linn DS/DSM/HUB Wifi==
+
==General Linn DS/DSM/HUB Wifi [[File:Wifi.png | 40px]]==
 
The Wifi module used with the Linn DS/DSM/HUB supports IEEE 802.11a/b/g/n/ac PSK/CCMP 1-CH <br>
 
The Wifi module used with the Linn DS/DSM/HUB supports IEEE 802.11a/b/g/n/ac PSK/CCMP 1-CH <br>
  
Line 15: Line 15:
 
:Some Wireless-Access-Points, WAPs and Router allow you to setup a seperate SSID, (<b>S</b>ervice <b>S</b>et <b>ID</b>intifier. this is name for a Wi-Fi network.)  
 
:Some Wireless-Access-Points, WAPs and Router allow you to setup a seperate SSID, (<b>S</b>ervice <b>S</b>et <b>ID</b>intifier. this is name for a Wi-Fi network.)  
  
===Advise on use===
+
===Advice on use===
 
We recommend that you configure your Wifi network to have seperate SSID for 2.4G and a different SSID for 5G wifi. Then configure the Linn DSM/Series-3 to <b><u>only</u></b> use the 5G network. <br>
 
We recommend that you configure your Wifi network to have seperate SSID for 2.4G and a different SSID for 5G wifi. Then configure the Linn DSM/Series-3 to <b><u>only</u></b> use the 5G network. <br>
This will then allow the music stream to work on a cleaner transport/Wifi and stop any device from intefering with the Music that you are listening to.
+
This will then allow the music stream to work on a cleaner transport/Wifi and stop any device from interfering with the music that you are listening to.
  
;There are [[Networking_Applications|Apps available]] to show you what is on your Wifi and your network
+
;There are <u>[[Networking_Applications|Apps available]]</u> to show you what is on your Wifi and your network
 +
 
 +
===Disable Wifi===
 +
To totally disable the Wifi, go into the Konfig:About tab and disable the <b>Wi-Fi</b> option.
 +
*NOTE: In the Konfig:WIFI tab, setting to NONE will only disconnect it from any Wifi network. The DSM will still broadcast its presence on the Wifi network.
 +
 
 +
===Wired LAN connections===
 +
If you have connected a LAN cable to your Linn DS/DSM/HUB/SERIES3 then this take priority over the Wifi connection. This means that the Wifi connection is still on but ignored when a there is a live connection on the products LAN socket.
 +
When the LAN connection is removed then the connection returns to Wifi.

Revision as of 16:21, 16 March 2021

General Linn DS/DSM/HUB Wifi Wifi.png

The Wifi module used with the Linn DS/DSM/HUB supports IEEE 802.11a/b/g/n/ac PSK/CCMP 1-CH

this supports both 2.4G & 5G communications.

Wifi History

2.4G

This was the first Wifi defined in 1997, 802.11b, generally used with 11, or 13 channels depending on your country. Each channel could each supply a data rate of 11MBit/s .
This data rate was then expanded to 54MBit/s in 2003, with the 802.11g. However, this still used 2.4G and instead of using 1channel to communicate it now uses 3-channels to communicate.This reduced your number of usable channels as other device communicating on a channel next door would now encroach into your channel(s).
This means that 2.4G band can have a lot of noise and interference. Coupled with fact that this same frequncy is used by DECT phones, Microwave ovens, Baby mointors, Taxi Radio, Bluetooth.... These can inject a lot if noise and interfere with Wifi streaming link to the Linn DS/DSM/HUB as it may force the LInn product off the Wifi network and it will have to retry the connection, this takes time and may cause your Linn product to keeping muting the Music

5G

A newer standard, 802.11n, allows usage of both 2.4G and 5G to give an even bigger data rate of up to 600Mbit/s.
As standards improve the 802.11ac that the Linn DSM/Series3 supports is a data rato of up to 1,300MBit/s.
5GHz is a much cleaner radio space with a lot less interence compare with 2.4G. The only negative is a slightly reduced range.
Some Wireless-Access-Points, WAPs and Router allow you to setup a seperate SSID, (Service Set IDintifier. this is name for a Wi-Fi network.)

Advice on use

We recommend that you configure your Wifi network to have seperate SSID for 2.4G and a different SSID for 5G wifi. Then configure the Linn DSM/Series-3 to only use the 5G network.
This will then allow the music stream to work on a cleaner transport/Wifi and stop any device from interfering with the music that you are listening to.

There are Apps available to show you what is on your Wifi and your network

Disable Wifi

To totally disable the Wifi, go into the Konfig:About tab and disable the Wi-Fi option.

  • NOTE: In the Konfig:WIFI tab, setting to NONE will only disconnect it from any Wifi network. The DSM will still broadcast its presence on the Wifi network.

Wired LAN connections

If you have connected a LAN cable to your Linn DS/DSM/HUB/SERIES3 then this take priority over the Wifi connection. This means that the Wifi connection is still on but ignored when a there is a live connection on the products LAN socket. When the LAN connection is removed then the connection returns to Wifi.