Template:FrontPanel:Selekt DSM

From LinnDocs
Jump to: navigation, search
Linn Selekt DSM Front.jpg
1. PIN BUTTONS - Personalised media selection Pins 1-6
Click for more....
* Press the button gently, turned as a "half press" to check what the button will do.
* Fully press the press to button to action/select this PIN operation.


Creation on PINS can be found in the Kazoo Manuals for
Windows 8/10/11,
MAC OSX 10.11+ ,
iPad/iPhone IOS 8+ and
Android 4.1+
2. CONTROL DIAL - Main control dial and switch interface
Click for more....
Selekt Dial AllPress.jpg
  • GO INTO SLEEP:
Press the dial CENTRE and continue to press the CENTRE (approx 2seconds) until the volume indicator dial starts to decrease.
  • BRING OUT OF SLEEP:
Press any of the UP/DOWN/LEFT/RIGHT or CENTRE of the dial.
  • SOURCE SELECT
  1. Press the dial DOWN to list the inputs available menu
  2. Scroll UP/DOWN the selection.
  3. Press RIGHT to select source or LEFT to cancel selection menu
  • PLAY/STOP/PAUSE- MUTE/UNMUTE
A quick press of the dial CENTRE will toggle between PLAY and STOP/PAUSE
(Radio-PLAY/STOP, Playlist-PLAY-PAUSE).
(Other sources-Mute/Unmute).
  • TRACK/PRESET PREV/NEXT
A quick press of the dial LEFT/RIGHT jump to Playlist tracks or Radio stations.
  • Volume
Rotate dial clockwise to increase volume, anti-clockwise to reduce volume. The dial indicators will tell you the present volume.
  • SURROUND TRIM
  1. With the Selekt DSM out of Sleep mode
  2. Press dial UP to enter Settings menu
  3. Press RIGHT to select or LEFT to cancel Settings menu
  4. Scroll UP/DOWN to highlight "Surround"
  5. Press RIGHT to select or LEFT to cancel Surround menu
  6. Select a the channel and trim with UP/DOWN


SELEKT INFORMATION
  • Software version
  1. With the Selekt DSM out of Sleep mode
  2. Press dial UP to enter Service menu
  3. Scroll UP/DOWN to highlight "Software Update"
  4. Press RIGHT to select or LEFT to cancel Service menu
  • Selekt "Properties" (Room name, device name, IP address etc)
  1. Press dial UP to enter Service menu
  2. Scroll DOWN to highlight "Properties"
  3. Press RIGHT to select or LEFT to cancel Properties menu


  • Selekt "Settings" (|Balance, Lipsync, Surround volumes etc)
  1. Press dial UP to enter Service menu
  2. Scroll DOWN to highlight "Settings"
  3. Press RIGHT to select or LEFT to cancel Settings menu

Note: Cancel any previous menus by pressing LEFT key.

My Selekt DSM has a RED Linn symbol on the dial, what does this mean?
RED-LINN.jpg If you do not have a live network/LAN connection on the Selekt DSM the Linn symbol on the dial will go red.


If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket (#3 on the back panel diagram) and NOT the Exakt socket (#10 back panel diagram).


WHITE-LINN.jpg After a live network/LAN connection is made the LINN symbol on the dial will turn white after 5-10 seconds.



I get a flashing Linn icon on the volume dial, what does this mean?
Selekt-Fallback-50px.gif
This means that the Selekt DSM is in :
  • Searching for Exakt speakers after being woken from Standby (typically only flashes for a couple of seconds after waking from Standby)
or
  • FALLBACK mode : Fallback is a state that means that the product is waiting for a software update. To stop this flashing either:
  • Power cycle (Switch Mains Off for 10seconds and then switch mains On) and leave the Selekt DSM to startup for approximately 1min.
or
  • Use the Linn App to upload software in to the Linn Selekt DSM. Check >HERE< for more information.
What does the shimmering dial mean?
Dialpx150.gif


This is to show that the Selekt DSM is starting up after a mains power on. It will typically do this in 30–45 seconds, but if the Linn Selekt DSM is performing a software update, this may take a little longer.





What does a dim/bright dial mean?
Selekt-Dial-Mute-150px.gif



This is to show when the Selekt DSM is in Mute mode.






3. Volume level & Mute indicators
Click for more....
To show the current volume value and mute condition.
4. Software update available
Click for more....
This is your Selekt DSM telling you that a software update is available.
The update is not compulsary, just an indication that an update is available.
A Software update is performed by the Manage Systems - Software Updates, IR handset or Linn App. Instructions on how to do this update are listed HERE
5. Media information - This will show the source name/track name/Radio station that you are on.
Click for more....
Using the IR handset i button to wake up and further presses allow you to scroll throught the display available.
  • On the Playlist this is typically Artist, Album & codec information. The lower bar will show the track position information
  • On a Radio source this will show the information provided by the radio station and the codec information
......
6. Transport information
Click for more....
Show the Play/Stop/Pause/Buffering symbol to show the current transport state.