Difference between revisions of "Template:FrontPanel:Selekt DSM"

From LinnDocs
Jump to: navigation, search
(Created page with "== '''Front Panel''' == center|700px {{Hidden Text Box Header|IndexText=<b>1. '''PIN BUTTONS''' - Personalised media selection Pins 1-6 <...")
(No difference)

Revision as of 09:56, 16 August 2019

Front Panel

Linn Selekt DSM Front.jpg
1. PIN BUTTONS - Personalised media selection Pins 1-6
Creation on PINS can be found in the Kazoo Manuals for
Windows 8/10,
MAC OSX 10.11+ ,
iPad/iPhone IOS 8+ and
Android 4.1+
2. CONTROL DIAL - Main control dial and switch interface
Selekt Dial AllPress.jpg
  • GO INTO SLEEP:
Press the dial CENTRE and continue to press the CENTRE (approx 2seconds) until the volume indicator dial starts to decrease.
  • BRING OUT OF SLEEP:
Press any of the UP/DOWN/LEFT/RIGHT or CENTRE of the dial.
  • SOURCE SELECT
  1. Press the dial DOWN to list the inputs available menu
  2. Scroll UP/DOWN the selection.
  3. Press RIGHT to select source or LEFT to cancel selection menu
  • PLAY/STOP/PAUSE
A quick press of the dial CENTRE will toggle between PLAY and STOP/PAUSE
(Radio-PLAY/STOP, Playlist-PLAY-PAUSE).
  • TRACK/PRESET PREV/NEXT
A quick press of the dial LEFT/RIGHT jump to Playlist tracks or Radio stations.
  • Volume
Rotate dial clockwise to increase volume, anti-clockwise to reduce volume. The dial indicators will tell you the present volume.
  • SURROUND TRIM
  1. With the Selekt DSM out of Sleep mode
  2. Press dial UP to enter Settings menu
  3. Press RIGHT to select or LEFT to cancel Settings menu
  4. Scroll UP/DOWN to highlight "Surround"
  5. Press RIGHT to select or LEFT to cancel Surround menu
  6. Select a the channel and trim with UP/DOWN


SELEKT INFORMATION
  • Software version
  1. With the Selekt DSM out of Sleep mode
  2. Press dial UP to enter Service menu
  3. Scroll UP/DOWN to highlight "Software Update"
  4. Press RIGHT to select or LEFT to cancel Service menu
  • Selekt "Properties" (Room name, device name, IP address etc)
  1. Press dial UP to enter Service menu
  2. Scroll DOWN to highlight "Properties"
  3. Press RIGHT to select or LEFT to cancel Properties menu


  • Selekt "Settings" (|Balance, Lipsync, Surround volumes etc)
  1. Press dial UP to enter Service menu
  2. Scroll DOWN to highlight "Settings"
  3. Press RIGHT to select or LEFT to cancel Settings menu

Note: Cancel any previous menus by pressing LEFT key.

3. Volume level & Mute indicators
To show the current volume value and mute condition.
4. Software update available
This is your Selekt DSM telling you that a software update is available.
The update is not compulsary, just an indication that an update is available.
A Software update is performed by the Konfig App. Instructions on how to do this update are listed HERE
5. Media information - This will show the source name/track name/Radio station that you are on.
Using the IR handset i button to wake up and furhter presses allow you to scroll throught the display available.
  • On the Playlist this is typically Artist, Album & codec information. The lower bar will show the track position information
  • On a Radio source this will show the information provided by the radio station and the coedc information
......
6. Transport information
Show the Play/Stop/Pause/Buffering symbol to show the current transport state.