Template:FAQ:SekritDSM FAQ

From LinnDocs
Revision as of 16:21, 9 November 2018 by Yoda (talk | contribs)
Jump to: navigation, search

HARDWARE

Difference between Sneaky DSM & Sekrit DSM

Sekrit DSM has

  1. A chassis (case) that can be mounted in a 19” (RAKK-SNKMDS) with power switch & Fallback on the front of the case
  2. Indicator leds to give the operational/connection status of the Sekrit DSM
  3. Can be used with BASIK-3 or BASIK-3-IR RCU
  4. The option to screw an IR emitter over DSM IR receiver. This is intended for IR repeater control interface whilst the Sekrit DSM is hidden.
  5. Full range Power Amplifier with the (Configured in Konfig)
a. Single ended option of 4x33W. For driving two pairs of in-wall/in-ceiling speakers with common volume control.
b. Bridged mode of 2x50W. For driving one pair of speakers. (This requires wiring the Nuetrik plug for bridged mode)

Sneaky DSM has

  1. A chassis (case) for table top positioning with side power switch. Fallback button on rear connector panel
  2. Front panel power indicator that flashes when IR command is being received or in boot mode awaiting a DHCP address.
  3. Full range Power Amplifier with the (Configured in Konfig)
a. Single ended option of 2x33W. For driving one pair of speakers in single amp mode.
b. Single ended option of 4x33W. For driving one pair of speakers in Bi-AMP mode.