Difference between revisions of "Template:FAQ:SekritDSM FAQ"

From LinnDocs
Jump to: navigation, search
m (Created page with "'''Sekrit DSM''' has #A chassis (case) that can be mounted in a 19” (RAKK-SNKMDS) with power switch & Fallback on the front of the case #Indicator leds to give the operational/…")
 
m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
====HARDWARE====
 +
=====HDMI=====
 +
:The Sekrit DSM/Sneaky DSM are only available with HDMI 1.4 connections.<br>
 +
:This product does <u><b>NOT</b></u> support '''ARC''' (Audio Return Channel)
 +
 +
=====Difference between Sneaky DSM & Sekrit DSM=====
 
'''Sekrit DSM''' has
 
'''Sekrit DSM''' has
 
#A chassis (case) that can be mounted in a 19” (RAKK-SNKMDS) with power switch & Fallback on the front of the case
 
#A chassis (case) that can be mounted in a 19” (RAKK-SNKMDS) with power switch & Fallback on the front of the case

Latest revision as of 08:20, 20 November 2018

HARDWARE

HDMI
The Sekrit DSM/Sneaky DSM are only available with HDMI 1.4 connections.
This product does NOT support ARC (Audio Return Channel)
Difference between Sneaky DSM & Sekrit DSM

Sekrit DSM has

  1. A chassis (case) that can be mounted in a 19” (RAKK-SNKMDS) with power switch & Fallback on the front of the case
  2. Indicator leds to give the operational/connection status of the Sekrit DSM
  3. Can be used with BASIK-3 or BASIK-3-IR RCU
  4. The option to screw an IR emitter over DSM IR receiver. This is intended for IR repeater control interface whilst the Sekrit DSM is hidden.
  5. Full range Power Amplifier with the (Configured in Konfig)
a. Single ended option of 4x33W. For driving two pairs of in-wall/in-ceiling speakers with common volume control.
b. Bridged mode of 2x50W. For driving one pair of speakers. (This requires wiring the Nuetrik plug for bridged mode)

Sneaky DSM has

  1. A chassis (case) for table top positioning with side power switch. Fallback button on rear connector panel
  2. Front panel power indicator that flashes when IR command is being received or in boot mode awaiting a DHCP address.
  3. Full range Power Amplifier with the (Configured in Konfig)
a. Single ended option of 2x33W. For driving one pair of speakers in single amp mode.
b. Single ended option of 4x33W. For driving one pair of speakers in Bi-AMP mode.