Difference between revisions of "Technical Specification:Majik DSM/4"

From LinnDocs
Jump to: navigation, search
m
m
Line 31: Line 31:
 
|-
 
|-
 
|Control protocol ||Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
 
|Control protocol ||Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
 +
|-
 +
|AKTIV CARD ||  <font style="color:black">Not supported on Majik DSM 2020 variant</span>  <br>
 +
:: * If Aktiv system is required then the LINE OUT can be connected to [[Manuals_-_Majik_Chakra_amplifier_(C2100,_C3100,_C4200,_C5100,_C6100)|MAJIK Power amplfiers]] & [[Manuals_-_Akurate_Chakra_amplifier_(C2200,_C3200,_C4200)|AKURATE Power amplifiers]] with Aktv cards installed.
 +
:: * Majik DSM/4 power amplifier output is ALWAYS full range.
 
|-
 
|-
 
|EXAKT ||  <font style="color:black">Not supported on Majik DSM 2020 variant</span>
 
|EXAKT ||  <font style="color:black">Not supported on Majik DSM 2020 variant</span>

Revision as of 09:38, 11 December 2020

Majik DSM / 4
Overview
Product Name:

Majik DSM

Date of Introduction: August 2020


Type: Network music player

with integrated pre/power amp

Dimensions

(H) 100 mm x (W) 350 mm x (D) 350 mm
(H) 3.95 inches x (W) 13.8 inches x (D) 13.8 inches

Weight 4.1 kg / 9 lb
Mains supply voltage (auto ranging)
100–120 V ac (±10%) 50–60 Hz
200–240 V ac (±10%) 50–60 Hz
Power consumption Sleep 15 W
Power continuous 500W
Ethernet 100Base-T RJ45
Supported file types FLAC, WAV, MP3, AAC, AIFF/AIFC, ALAC, OGG/VORBIS, WMA, DSD (DSF and DFF)
Audio sample rates 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k,29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
Word depths 16–24 bits
Control protocol Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
AKTIV CARD Not supported on Majik DSM 2020 variant
* If Aktiv system is required then the LINE OUT can be connected to MAJIK Power amplfiers & AKURATE Power amplifiers with Aktv cards installed.
* Majik DSM/4 power amplifier output is ALWAYS full range.
EXAKT Not supported on Majik DSM 2020 variant
inputs

1off Ethernet

1off Wifi

Supports IEEE 802.11a/b/g/n/ac PSK/CCMP 1-CH

1off Bluetooth

Bluetooth v4.2
  • Audio is transferred using SBC encoding
  • This is not natively compatible with Googlecast.

1off HDMI ARC (Via HDMI Output)

4off HDMI 2.0
1off configurable input to either LINE or MM Phono,
Digitizing analog input stage with ADC Sample rate/resolution: 192kHz/24 bits
Line-in
max voltage 4.25Vrms
Input impedance - 50 kΩ
MM Phono
max voltage (1kHz): 67mV rms. (Gain +40dB),
Input impedance 47kΩ, 100pf
MC Phono
Not supported on Majik DSM 2020 variant
1off Toslink
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
1off SPDIF (This is disabled if this socket is configured as a Output)
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Nominal input voltage 0.5 V peak
1off USB Audio Class 2
Support sample rates 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Sources LAN
Internet radio
Tidal
Qobuz
Calm Radio
Spotify Connect
NetAux
Roon
ANALOGUE AUDIO OUTPUTS
Shares common volume control
Line Output:
1off RCA:

Output Level: 2V rms @volume 80



Output Impedance: 300Ω



Dynamic Range      110dB
Power Amplifier Output:
Bridged Class-D amplifier with post-filter feedback
2prs of 4mm/Banana/binding post terminals.
      Max output power:




100W/channel into 4Ω load,


50W / channel into 8Ω load


Dynamic Range      106dB
Gain: 20dB
Headphone Output:
1off 6.35mm (1/4in) TRS connector:

Max Output Level: 61mW rms into 16Ω



83mW rms into 32Ω


Output Impedance: 57Ω


Dynamic Range      115dB
DIGITAL OUTPUT SPDIF Output
1off SPDIF (Shared with SPDIF output. The connector has to be configured as either and Input or an Output. (Fixed volume Stereo digital output)
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz