Difference between revisions of "Sneaky Music DS"

From LinnDocs
Jump to: navigation, search
(System Setup)
(Manuals)
Line 23: Line 23:
  
 
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]
 
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]
 +
 +
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]
  
 
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]
 
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]

Revision as of 14:28, 27 October 2011

SneakyMusicDS Silv 3QRight RGB 72DPI.jpg

Product info

  • Product Name: Sneaky Music DS
  • Date of Introduction: March 2008
  • Type: Network Music Player.

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

Remote Control manual

Kinsky Jukebox manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

Network Setup

Back Panel Connections

Sneaky DS rear.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  3. SPEAKER OUTPUTS - To connect to loudspeakers
  4. ANALOGUE OUTPUTS (RCA, variable/fixed level) - To connect to a preamplifier or power amplifier if the internal volume control is enabled.
  5. DIGITAL OUT (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
  6. DIGITAL OUT (SPDIF) - To connect to an external DAC or computer that has an Spdif digital input.
  7. RCU ACCESSORY - To connect to a Linn BASIK3 or BASIK3-IR Knekt control device.
  8. RS232 PORTS - To connect to other Linn devices that don't have ethernet.
  9. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  10. ETHERNET - To connect to a network.


Front Panel Connections

SneakyMusicDS Silv Front RGB 72DPI.jpg

Product status is indicated by the LED behind the Linn badge, default settings are shown below.

LED OFF - no power
LED ON DIM - product in standby
LED ON BRIGHT - product is active
LED SLOW FLASH - searching for IP address (boot)
LED FAST FLASH - fallback (re-programme)

Note: LED may be turned off using Linn Konfig.

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Sneaky Music DS.
  • Positioning - Please read the information on positioning your Sneaky Music DS.
  • Important Information:Protection - The Sneaky Music DS features over-current and over-temperature protection

For further assistance, try our customer support pages or the Linn Forum.