Difference between revisions of "Sneaky Music DS"

From LinnDocs
Jump to: navigation, search
(Back Panel Connections)
(Back Panel Connections)
Line 44: Line 44:
 
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
 
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
 
# '''SPEAKER OUTPUTS RIGHT, LEFT''' - Amplified output for connection to loudspeakers
 
# '''SPEAKER OUTPUTS RIGHT, LEFT''' - Amplified output for connection to loudspeakers
# '''ANALOGUE OUTPUTS'''(RCA, variable/fixed level) - To connection to a preamplifier or  power amplifier if the internal volume control is enabled.
+
# '''ANALOGUE OUTPUTS''' (RCA, variable/fixed level) - To connection to a preamplifier or  power amplifier if the internal volume control is enabled.
# '''DIGITAL OUT'''(TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
+
# '''DIGITAL OUT''' (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
# '''DIGITAL OUT'''(SPDIF) - To connect to an external DAC or computer that has an Spdif digital input.
+
# '''DIGITAL OUT''' (SPDIF) - To connect to an external DAC or computer that has an Spdif digital input.
 
# '''RCU ACCESSORY''' - To connect to a Linn BASIK3 or BASIK3-IR Knekt control device.
 
# '''RCU ACCESSORY''' - To connect to a Linn BASIK3 or BASIK3-IR Knekt control device.
 
# '''RS232 PORTS''' - To connect to other Linn devices that don't have ethernet.
 
# '''RS232 PORTS''' - To connect to other Linn devices that don't have ethernet.

Revision as of 17:39, 14 December 2010

SneakyMusicDS Silv 3QRight RGB 72DPI.jpg

Product info

  • Product Name: Sneaky Music DS
  • Date of Introduction: March 2008
  • Type: Network Music Player.

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

Kinsky Jukebox manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

System Setup

Network setup guide.

Back Panel Connections

Sneaky DS rear.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  3. SPEAKER OUTPUTS RIGHT, LEFT - Amplified output for connection to loudspeakers
  4. ANALOGUE OUTPUTS (RCA, variable/fixed level) - To connection to a preamplifier or power amplifier if the internal volume control is enabled.
  5. DIGITAL OUT (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
  6. DIGITAL OUT (SPDIF) - To connect to an external DAC or computer that has an Spdif digital input.
  7. RCU ACCESSORY - To connect to a Linn BASIK3 or BASIK3-IR Knekt control device.
  8. RS232 PORTS - To connect to other Linn devices that don't have ethernet.
  9. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  10. ETHERNET - To connect to a network.


Front Panel Connections

SneakyMusicDS Silv Front RGB 72DPI.jpg

Product status is indicated by the LED behind the Linn badge, default settings are shown below.

LED OFF - no power
LED ON DIM - product in standby
LED ON BRIGHT - product is active
LED SLOW FLASH - searching for IP address (boot)
LED FAST FLASH - fallback (re-programme)

Note: LED may be turned off using Linn Konfig.

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Sneaky Music DS.
  • Positioning - Please read the information on positioning your Sneaky Music DS.
  • Important Information:Protection - The Sneaky Music DS features over-current and over-temperature protection

For further assistance, try our customer support pages or the Linn Forum.