Difference between revisions of "Sneaky Music DS"

From LinnDocs
Jump to: navigation, search
Line 39: Line 39:
 
== '''Back Panel Connections''' ==
 
== '''Back Panel Connections''' ==
  
[[Image:Sneaky DS rear.jpg|center|700x180px|Image:Sneaky_DS_rear.jpg]] <br>
+
[[Image:Sneaky DS rear.jpg|center|720x230px|Image:Sneaky_DS_rear.jpg]] <br>
  
# '''POWER SWITCH'''- For switching the power to the unit on and off
+
# '''MAINS INPUT''' - For connection to the mains supply.
# '''MAINS INPUT''' - For connection to the mains supply. See Connecting to the mains supply.
+
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
# '''SPDIF IN 1 to 3''' - For connection to digital electrical (coaxial) source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
+
# '''SPEAKER OUTPUTS RIGHT, LEFT''' - Amplified output for connection to loudspeakers
# '''SPDIF OUT''' - For connecting to a device with a digital electrical (coaxial) recording device.
+
# '''ANALOGUE AUDIO OUTPUTS RIGHT, LEFT''' - Analogue outputs for connection to a pre-amplifier or directly to a power amplifier if the internal volume control is enabled.
# '''TOSLINK IN 1 to 3''' - For connection to digital optical source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
+
# '''TOSLINK OUT''' - For connecting to a device with a digital optical input.
# '''EARTH GROUND''' - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
+
# '''SPDIF OUT''' - For connecting to a device with a digital electrical (coaxial) input.
# '''TOSLINK OUT''' - For connecting to a device with a digital optical recording device.
+
# '''RCU ACCESSORY''' - For connecting to linn BASIK3 or BASIK3-IR.
# '''RIGHT, LEFT SPEAKER''' - Amplified output for connection to loudspeakers
+
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.
# '''IR OUT 1 &amp; 2''''- Infrared flasher connectors. Allow the control via the handset of devices that accept infra-red signals.
+
# '''FALLBACK''' - Used when reprogramming the unit.
 
# '''ETHERNET''' - For connecting the unit to the Internet router.
 
# '''ETHERNET''' - For connecting the unit to the Internet router.
# '''FALLBACK''' - Used when reprogramming the unit.
 
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.
 
# '''ANALOGUE AUDIO INPUTS 1 to 4''' - For connection to line-level source products, such as a CD player, radiotuner, tape deck, etc. INPUT 4 can be configured as a moving-magnet, moving-coil or line-level input (the factory setting is moving-magnet).
 
# '''PRE OUT''' - Line-level outputs for connection to an external power amplifier in a multi-amp or aktiv system.
 
# '''LINE OUT''' - Fixed volume outputs for connection to a tape recorder or other analogue recording device.
 
  
 
== '''Front Panel Connections''' ==
 
== '''Front Panel Connections''' ==

Revision as of 11:04, 30 October 2009

SneakyMusicDS Silv 3QRight RGB 72DPI.jpg

Product info

  • Product Name: Sneaky Music DS
  • Date of Introduction: March 2008
  • Type: Network Music Player.

Latest software

Latest software releases

Open source software

Manuals

Kinsky Desktop manual

Linn Konfig manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

System Setup

Recommended DS Network setup guide


Back Panel Connections

Image:Sneaky_DS_rear.jpg


  1. MAINS INPUT - For connection to the mains supply.
  2. EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  3. SPEAKER OUTPUTS RIGHT, LEFT - Amplified output for connection to loudspeakers
  4. ANALOGUE AUDIO OUTPUTS RIGHT, LEFT - Analogue outputs for connection to a pre-amplifier or directly to a power amplifier if the internal volume control is enabled.
  5. TOSLINK OUT - For connecting to a device with a digital optical input.
  6. SPDIF OUT - For connecting to a device with a digital electrical (coaxial) input.
  7. RCU ACCESSORY - For connecting to linn BASIK3 or BASIK3-IR.
  8. RS232 PORTS - For connection to Linn source products without ethernet ports.
  9. FALLBACK - Used when reprogramming the unit.
  10. ETHERNET - For connecting the unit to the Internet router.

Front Panel Connections

Majik DS-I front.jpg
  1. MUTE BUTTON - Mutes and un-mutes the volume
  2. FRONT PANEL DISPLAY
  3. STANDBY BUTTON - Brings the unit out of, or puts into, standby
  4. VOLUME -/+ - Adjust the volume level
  5. HEADPHONE SOCKET - Accepts a 3.5 mm headphone jack
  6. AUXILIARY SOURCE SOCKET - For connecting a portable source, e.g. MP3 player. Accepts a 3.5 mm jack.
  7. SOURCE -/+ - Changes Sources

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Sneaky Music DS.
  • Positioning - Please read the information on positioning your Sneaky Music DS.
  • Important Information:Protection - The Sneaky Music DS features over-current and over-temperature protection

For further assistance, try our customer support pages or the Linn Forum.