Renew DS

From LinnDocs
Revision as of 08:26, 5 November 2013 by AlisonT (talk | contribs) (Manuals)
Jump to: navigation, search
RenewDsDevice.png

Product info

  • Product Name: Renew DS
  • Date of Introduction: May 2011
  • Type: Digital music player

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Product Information / Quickstart Guide (for KlimaxDS)

Konfig manual

Kinsky Desktop manual

Remote Control manual

Kinsky Jukebox manual

Safety Information

Warranty Terms and Conditions

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Back Panel Connections

Image:Klimax_DS_rear.jpg


  1. MAINS INPUT - For connection to the mains supply.
  2. POWER SWITCH- For switching the power to the unit on and off
  3. ETHERNET - For connecting the unit to the network.
  4. RS232 PORTS - For connection to Linn source products without ethernet ports. Please note: Early versions on the Renew DS has RS232 port 1 & 2 labels swopped around. If you have any difficulty, please test this connection using the Konfig-Diagnostics
  5. FALLBACK - Used when reprogramming the unit.
  6. EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  7. UNBALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
  8. BALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.


Front Panel Connections

Image:RenewDsDevice.png


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

For further assistance, try our customer support pages or the Linn Forum.