Majik DS

From LinnDocs
Revision as of 10:56, 21 October 2014 by Yoda (talk | contribs) (Product info)
Jump to: navigation, search
MajikDS Silv 3QRight RGB 72DPI.jpg

Product info

  • Product Name: Majik DS (/1)
  • Date of Introduction: June 2008
  • Upgraded to Majik DS/1 in April 2012 with cosmentic changes
New feet, power switch moved to front lower corner and silver facia on silver products.
  • Type: Digital music player

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Owner's Manual

Product Information Sheet

Konfig manual

Kinsky Desktop manual

Remote Control manual

Kinsky Jukebox manual

Safety Information

Warranty Terms and Conditions

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Back Panel Connections

Image:Majik_DS_rear.jpg


  1. POWER SWITCH- To switch the power on/off.
  2. MAINS INPUT - To connect to the mains electricity supply.
  3. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  4. ETHERNET - To connect to a network.
  5. FALLBACK - To put the device into Fallback mode (used when reprogramming).
  6. RS232 PORTS - To connect to other Linn devices that don't have ethernet.
  7. SPDIF OUT - To connect to an external DAC or computer that has an Spdif input.
  8. TOSLINK OUT - To connect to an external DAC or computer that has a TOSLINK input.
  9. ANALOGUE AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.


Front Panel Connections

MajikDSFront.png


  1. DISP BUTTON - Changes the front panel display mode.
  2. SKIP BUTTONS - Skips to the previous/next track
  3. STOP BUTTON - Stops playing the current track
  4. PLAY BUTTON - Starts playing the current track
  5. STANDBY BUTTON - Brings the product in/out of standby.
  6. FRONT PANEL DISPLAY


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

For further assistance, try our customer support pages or the Linn Forum.