Difference between revisions of "Linn DS/DSM Network requirements"
m |
m |
||
| Line 24: | Line 24: | ||
:Make sure they are programmed to work in Layer-<b>2</b> mode | :Make sure they are programmed to work in Layer-<b>2</b> mode | ||
| + | |||
| + | ;Jumbo packet/frames networking | ||
| + | :This is not an official standard and is not supported by the Linn DS/DSM. | ||
Revision as of 08:47, 2 December 2019
ALL Linn DS/DSM products support 100Base-T connections and used on standard IPV4 network
- The Services, ports and protocols are used by the Linn app and players in the network
- Services
- UPnP & SSDP (Linn DS/DSM discovery and control)
- Port 1900 (UDP)
- Port 2869 (TCP),
- Ports 49152-65535 (both TCP & UDP)
- Port 1900 (UDP)
- UPnP & SSDP (Linn DS/DSM discovery and control)
- LPEC (Linn Products Event Control)
- Port 23 (TCP)
- LPEC (Linn Products Event Control)
- mDNS (Bonjour)
- IPV4 224.0.0.251 port 5353 (UDP)
- mDNS (Bonjour)
- DHCP
- Ports 67, 68 (UDP)
- DHCP
- ODP (OpenHome Device Protocol)
- TCP on an ephemeral port
- ODP (OpenHome Device Protocol)
- Managed Switches
- Make sure they are programmed to work in Layer-2 mode
- Jumbo packet/frames networking
- This is not an official standard and is not supported by the Linn DS/DSM.
- Multicast or Unicast
If you are using more than six Linn DS/DSM products in the same network and want to share/Songcast the music to other rooms then make sure the LAN can support Multicasting.
If you have issues with your Routers check:
- QoS is turned OFF (some Routers do not implement this consistantly and this may block Linn DS discovery).
- If you have a simple network with Unmanaged switches, turn "IGMP Snooping" - OFF otherwise check IGMPv2 and IGMPv3 is supported.
- On BTHomeHubs turn "Extended UPnP security" - OFF
- On DLINK, within "Advanced", Multicast Streams - ENABLE
