Klimax DSM-3:RCA-XLR Output toggle

From LinnDocs
Revision as of 07:42, 12 May 2022 by JamieMacB (talk | contribs)
Jump to: navigation, search
From Davaar firmware 4.81.396 (Apr 2021), you now have the ability to enable/disable the XLR and RCA analogue outputs on the Klimax DSM/3 (AV) & (Music).
For example:
This will allow you to have say, Loudspeakers on the XLR outputs and a headphone amplifier on the RCA outputs.(The Exakt outputs are unaffected in this setup.)




REM022 Star.png
To select the Analogue Output mode using the IR Handset
1. To switch between outputs press and hold * button on the REM022 handset
This will then switch to the other analogue output. If currently on XLR then it will switch to RCA. If currently RCA then it switch to XLR
2. Press and hold * button on the REM022 handset to switch back to the other output.
Konfig and Dial selection will allow you to have both XLR & RCA operational at the same time.







KlimaxDSM-3 Dial.jpg
To select the Analogue Output mode using the top dial
1. With the Klimax DSM out of Sleep mode
2. Press dial UP to enter Service menu
3. Scroll UP/DOWN to highlight "Settings"
4. Press RIGHT to select this menu
5. Scroll DOWN to highlight the "Analog Output" and RIGHT to select
6. Use the UP/DOWN keys to select
RCA Only: to only output on the RCA sockets
XLR Only: to only output on the XLR sockets
Dual (XLR & RCA): to have both RCA and XLR sockets live.
Off: to disable these analogue outputs.
Press LEFT to cancel Service menu