Difference between revisions of "Klimax DSM"

From LinnDocs
Jump to: navigation, search
(Network Setup)
(Network Setup)
Line 41: Line 41:
  
 
[[DS Budget System| DS Budget System Setup]]
 
[[DS Budget System| DS Budget System Setup]]
 +
 
[[DS Entry Level System| DS Entry Level System Setup]]
 
[[DS Entry Level System| DS Entry Level System Setup]]
 +
 
[[DS High End System| DS High End System Setup]]
 
[[DS High End System| DS High End System Setup]]
  

Revision as of 13:37, 20 December 2011

KlimaDS 3Q 02 low res.jpg

Product info

  • Product Name: Klimax DSM
  • Date of Introduction: October 2011
  • Type: Integrated digital music player and preamplifier

Latest software

Latest software releases

Open source software

Manuals

Quickstart Guide

Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Kinsky Jukebox manual

Safety Information

Warranty Terms & Conditions

HDMI Setup

HDMI Setup

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Back Panel Connections

Image:Klimax_DSM_rear.jpg


  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
  3. TOSLINK IN- To connect sources with Toslink (optical) digital outputs.
  4. ETHERNET - To connect to a network.
  5. SPDIF IN - To connect sources with Spdif digital outputs.
  6. BALANCED IN RIGHT, LEFT - To connect sources with balanced (XLR) outputs*.
  7. BALANCED OUT RIGHT, LEFT - To connect to a power amplifier with balanced (XLR) inputs.
  8. UNBALANCED OUT RIGHT, LEFT - To connect to a power amplifier with unbalanced (RCA) inputs.
  9. EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  10. HDMI IN 1, 2, 3 - To connect sources with HDMI outputs.
  11. HDMI OUT - To connect to a display device with HDMI inputs.


* XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs.


Front Panel

Image:Klimax_DSM_front.jpg


  1. DISPLAY
  2. ON / OFF SWITCH


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Klimax DSM.
  • Positioning - Please read the information on positioning your Klimax DSM.

For further assistance, try our customer support pages or the Linn Forum.