- 1 Supported versions
- 2 Operation
- 2.1 The room / source lists page
- 2.2 The now playing page
- 2.2.1 Artwork
- 2.2.2 Metadata
- 2.2.3 Controls
- 2.2.4 Sources
- 184.108.40.206 Playlist
- 220.127.116.11 Radio
- 18.104.22.168 !UpnpAv
- 22.214.171.124 External
- 126.96.36.199 Songcast
- 2.3 The browser page
- 2.4 Settings
- 3 Troubleshooting
Check the iOS is at least version 3.2 or above (Settings-General-About-Version) We suggest do a Version update on your iPad/iPhone/iPod device if you have any difficulties with Kinsky
The room / source lists page allows you to select music sources and bring these in and out of standby.
The now playing page consists of a fixed controls area at the bottom, a central section and a metadata area at the top which provides information about the currently playing track. The central section of the now playing area will either contain the currently playing track's artwork or the playlist in the centre depending on which of these modes is currently selected. The view playlist button in the top right hand corner of the page toggles between these two modes.
The Browser page provides management and access to your media collection. You use the browser to locate media to play within the current room. It also contains a button to show the settings dialog, which allows you to configure more advanced options in Kinsky.
The room / source lists page
A typical modern home contains multiple HI-FIs, each of which are typically located in different rooms. You can configure a Linn device to appear in a particular room within Kinsky, either using its web configuration interface or using Linn Konfig.
The room list (on the left in the above screenshots) provides a way for a user to move between the different rooms he or she has configured on their system.
When moving between rooms the music will continue to play.
When a room is selected all preamps and sources in the room are brought out of standby, and the page then switches to the source list (on the right in the above screenshots) to allow source selection. To move from the source list back to the room list, tap the button.
The source list provides a way for a user to change the current music source in the selected room. The number and types of sources available in each room depends on the HI-FI components installed in the room (see sources).
Tap a source to change to that source. Kinsky will now move to the now playing page.
Putting a room into standby
Automatic Room Selection
Kinsky can be configured to automatically select a room at start up.
The start up room can be configured in the 'Startup Room' setting in the settings dialog.
The default behaviour is for the last selected room to be selected.
The now playing page
The now playing page shows information about what is playing or ready to play in the currently selected room.
The central section of the now playing page displays the artwork for the currently playing track. This may not be visible if the playlist is shown. The button in the top right hand corner of the page toggles between artwork and playlist views.
The area at the top left of the now playing page displays the metadata for the currently playing track. For example, the title, artist and album information for a music track, or radio preset name and metatext for a radio station.
The controls area, which is located at the bottom of the now playing page, groups together all of the commonly used controls to skip track, resume/pause a track, seek within a track and - if the room has a preamp - control the volume.
If the currently playing track allows seeking (e.g. it is not a radio station), then the seek control will be enabled and display the current track time (either elapsed or remaining).
Tapping the seek control brings up an enlarged rotating control that can be used to adjust the track position. Rotate the outer ring to seek to a different location within the track.
To dismiss the enlarged control, tap the seek control at the bottom of the page for a second time.
(Note: if the button controls setting is selected, then this will change to an up/down button instead, which can be pressed and held to seek within the track.)
Tap the center of the enlarged seek control to toggle the current track location between time remaining and time elapsed (the toggle time remaining/elapsed displays as a separate button if the button controls setting is enabled).
If volume of the currently selected room can be controlled by Kinsky, then the volume control will be enabled and display the current volume.
Tapping the volume control brings up an enlarged rotating control that can be used to adjust the volume. Rotate the outer ring to turn the volume up or down.
To dismiss the enlarged control, tap the volume control at the bottom of the page for a second time.
(Note: if the button controls setting is selected, then this will change to an up/down button instead which can be pressed and held to change the volume.)
To mute or un-mute the volume tap in the inner circle of the enlarged control (the toggle mute button displays as a separate button if the button controls setting is enabled). The volume control dims when the volume has been muted. If the volume is muted and you rotate the outer ring, this will also unmute the volume.
If the currently selected source is able to be controlled by Kinsky, then the transport controls will become enabled. These control starting/stopping playback and moving backwards and forwards between playlist tracks or radio presets.
The transport control shows the controls that are appropriate for the currently selected source, e.g. for the Playlist source the transport controls are skip backward, play/pause, and skip forward.
The Playlist source allows a user to create a list of tracks that are played through in sequential order. A play indicator shows the currently playing track, which moves sequentially through the playlist as the list is played. When adding tracks (or a selection of tracks) to the playlist, you can choose to Play Now (inserts the track(s) at the end of the playlist and starts immediate playback of the added track(s)), Play Next (inserts the track(s) after the currently playing track) or Play Later (inserts the track(s) at the end of the playlist).
The Playlist source allows for gapless playback of tracks.
The Playlist source can hold a maximum of 1000 tracks.
Building and editing a playlist
Browse media servers
To browse a media server, first select the Library location from the browser's homepage, then select the media server you wish to browse for music.
To insert tracks into a media renderer's playlist, press and hold the item in the browser and choose Play Now, Play Next or Play Later. Alternatively, if the item is a music track (or an album header if you are browsing an album container), the button (within the browser) toggles the default mode for inserting a single track or album header when the item is touched.
Saving the playlist
Editing the playlist
Deleting the playlist
Deleting a track
Reordering the playlist
You can re-order the tracks in the playlist by tapping edit to enter edit mode, then dragging and dropping the (reorder) button to the right of the track (or if grouping is selected, by dragging the reorder button to the right of the album header to move all tracks in the album).
Grouping tracks by album
The Group playlist tracks option toggles a mode whereby consecutive items in a playlist with the same album name in their metadata are grouped under a subheading of the album details. This feature allows more items to be presented on screen at once and prevents duplicate artwork being shown in the playlist.
Repeat And Shuffle Modes
The Radio source allows a user to listen to internet radio stations, as well as podcasts and 'play again' shows. The Radio source allows a user to preset their favourite stations for quick access. A play indicator show the currently playing preset.
The Radio source can hold a maximum of 100 presets. These are configurable by setting the appropriate !TuneIn username under the !TuneIn Radio section in your device's configuration page (or via Linn Konfig).
The !UpnpAv source allows a user to create a list of tracks that are played through in sequential order. A play indicator shows the currently playing track, which moves sequentially through the playlist as the list is played. When adding tracks (or a selection of tracks) to the playlist, you can choose to Play Now (inserts the track(s) at the end of the playlist and starts immediate playback of the added track(s)), Play Next (inserts the track(s) after the currently playing track) or Play Later (inserts the track(s) at the end of the playlist).
The !UpnpAv source provides support for standard UPnP Media Renderers. If a Playlist source is available in a room it should be used in preference to the !UpnpAv source as it offers the following benefits,
1. Gapless playback of tracks. 1. Retains the created playlist between Kinsky sessions. 1. Allows predicable playback in the presence of multiple control points. Operation of the !UpnpAv source is similar to that of the [[#Playlist playlist source].
The External source allows a user to play external sources such as CD/DVD player, games console or portable music player.
The types of external sources are,
1. Aux 2. SPDIF 3. TOS 4. Analogue
The Songcast source allows a user to listen to a remote Songcast source such as another DS on the network.
A list of all available Songcast senders which have been discovered on the network will be discovered and displayed in the playlist area when the Songcast source is selected. Tap a sender to connect and start listening to it. When playing a sender, a room icon appears next to it, which provides a short-cut button to open the sender's room.
The browser page
The browser page presents a unified view of all the music sources on your local network. The home page of the browser consists of a list of currently enabled locations.
Each of these locations provides a view of media files that can be browsed and selected for playback in the playlist source.
In addition to the main area of the browser, which displays the current location's contents, the up button , located in the top left of the browser, takes the browser back up to the parent folder. (Note: the up button is shown blank here, but it contains the title of the parent folder).
The Library location provides a way to browse the UPnP media servers on your home network. A UPnP media server indexes your digital music collection and provides a mechanism for control points to browse your music collection.
The Local Playlists location provides a way to browse, manage and insert saved playlists into a media renderer's playlist.
To reorder or delete local playlists or tracks within a local playlist, tap the Edit button (which will only appear when the location you are in can be edited) to enter a mode similar to the playlist's edit mode. From there, you can move or delete items in the same manner as editing within the playlist's edit mode.
* About: This provides information about the current version number of Kinsky. * Extended track info: Shows or hides the Technical Information in the now playing page. * Button controls: Toggles between rotary and button controls for volume and seek within theControls controls area. * Group playlist tracks: Toggles grouping of tracks by album in the playlist. * Prevent auto-lock: Prevents screen lock during inactivity. * Auto send crash log: this setting will send a crash log to Linn automatically when something goes wrong. This allows us to continuously improve the product. * Startup room: Allows choosing of which room is shown on startup. Either a specific room, last selected or none can be chosen. * Cloud Servers: This feature allows a UPnP media server which is behind a firewall or is otherwise undiscoverable to be manually configured to appear in Kinsky. * Plugins: Individual browser locations can be enabled or disable using the options in this section. * Local Playlists plugins allows you to retrieved Saved Playlists on that Apple device * Shared Playlists plugin allows you to retrieved Saved Playlists on the PC/MAC SongBox software * View Manual: Links to this manual page.
Cannot see any devices on the Kinsky
Updates to the Apple operating system (IOS 5.1.0) have been found to cause wireless communications issues for any Apple software. We have found that your Wifi device should be setup with
* WPA2 Personal for Wireless authentication * AEP : Wireless encryption * if your WAP supports 'n' channel then set the bandwidth to 20MHz * 'Forget the Network' On your iPad, then re-attach it after power cycling the Wifi device (WAP)
This should improve all communications to your i-device
Artwork does not appear
Some Media Servers such as Fuppes no not support coverart. Other media servers do not like the size of the coverart, this should be resizesd to 600x600 pixels.
Check that the folder with the Music files have a coverart picture called "folder.jpg" with a size of 600x600, this will allow generally allow the album view to show the coverart. (Some coverart maybe in the PNG format, this should be opened and resiezed to 600x600, then resaved as folder.jpg)
Some UPnP Media Servers also require the coverart to be embedded within each Music file. This can be done with software such as MediaMonkey, Foobar2000, Tag& Rename etc., after which, rebuild your database to ensure that the UPnP Media server has updated its database
If you have changed any artwork recently, the UPnP Media server may still be looking for the older original version that no longer exists. We would recommend that you rebuild the Media Database then recheck.
If there was some error with downloading the artwork, there will be an entry in your Debug Console associated with that bit of artwork and it will give some reason for not being able to download the artwork and the URI to the artwork, hopefully this should help you fix the issue and at the very least try and download the artwork in your browser to see if you media server is providing a valid image!
iPhone 4S : I have to wait 15minutes before my DS appears
This has been cured with release 4.3.3 (June 2012)
Kinsky v4.3.11 runs for a few seconds then exits
This is a known issue with early versions of IOS4 & 5 causes this issue. This is due to internal error with one of the software libraries used. This is under investigation and repair by the library suppliers.
No Rooms or Media Servers are discovered
It has been discovered the iOS device's Wi-Fi can become unresponsive to the UPnP discovery mechanism. To correct this situation you need to reset the Wi-Fi stack. To do this turn the iOS device's Wi-Fi off and then back on.