Kiko DSM information

From LinnDocs
Jump to: navigation, search
KikoFront-1-0.jpg

Product info

  • Product Name: Kiko DSM (2012 / 2018 Variant)
  • Date of Introduction: July 2012 - April 2019
  • Type: Integrated digital music player, pre-amplifier and power amplifier

Support

Linn Support Site

Latest software

Latest software releases

Details of latest Product release software

Manuals

Konfig manual

Kazoo User Guide

DSM Remote control manual

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

HDMI Setup

HDMI Setup

Network Setup

Back Panel Connections

Kiko DSM rear 1-1.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  3. ETHERNET - To connect to a network (100Base-T)
  4. HDMI OUTPUT - To connect to a display device with HDMI 1.4 inputs.
  5. HDMI INPUTS - To connect sources with HDMI 1.4 outputs.
  6. DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.
  7. DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
  8. ANALOGUE INPUT (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
  9. SPEAKER OUTPUTS - To connect to loudspeakers

Front Panel Connections

Kiko DSM Front 1-1.jpg
  1. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
  2. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
  3. IR SENSOR - Recieves IR commands
  4. STANDBY LED
  5. FRONT PANEL DISPLAY
  6. POWER SWITCH- Switches the power on/off


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.


FAQ's

Check:


Technical Specification

Technical Specification:Linn Kiko DSM


For further assistance, try our customer support pages