Kiko DSM information

From LinnDocs
Revision as of 15:31, 16 April 2012 by IanW (talk | contribs) (Back Panel Connections)
Jump to: navigation, search
AkurateKontrolFrontTop.jpg

Product info

  • Product Name: Kiko DSM
  • Date of Introduction: May 2012
  • Type: Integrated digital music player, pre-amplifier and power amplifier

Latest software

Latest software releases

Open source software

Manuals

Quickstart Guide

Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Kinsky Jukebox manual

Safety Information

Warranty Terms and Conditions

HDMI Setup

HDMI Setup

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup


Back Panel Connections

Kiko DSM rear.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming).
  3. ETHERNET - To connect to a network.
  1. HDMI OUTPUT - To connect to a display device with HDMI inputs.
  2. DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.
  3. DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
  4. ANALOGUE INPUT (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
  5. HDMI INPUTS - To connect sources with HDMI outputs.
  6. SPEAKER OUTPUTS - To connect to loudspeakers

Front Panel Connections

Akurate DSM front.jpg
  1. FRONT PANEL DISPLAY
  2. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
  3. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
  4. POWER SWITCH- Switches the power on/off


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

For further assistance, try our customer support pages or the Linn Forum.