Kiko DSM information

From LinnDocs
Revision as of 13:49, 20 November 2018 by Yoda (talk | contribs) (Product info)
Jump to: navigation, search
KikoFront-1-0.jpg

Getting Started

www.linn.co.uk/go/kiko

Product info

  • Product Name: Kiko DSM (2012 / 2018 Variant)
  • Date of Introduction: July 2012 -
  • Type: Integrated digital music player, pre-amplifier and power amplifier

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Konfig manual

Kazoo User Guide

DSM Remote control manual

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

HDMI Setup

HDMI Setup

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup


Back Panel Connections

Kiko DSM rear 1-1.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming).
  3. ETHERNET - To connect to a network.
  4. HDMI OUTPUT - To connect to a display device with HDMI 1.4 inputs.
  5. HDMI INPUTS - To connect sources with HDMI 1.4 outputs.
  6. DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.
  7. DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
  8. ANALOGUE INPUT (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
  9. SPEAKER OUTPUTS - To connect to loudspeakers

Front Panel Connections

Kiko DSM Front 1-1.jpg
  1. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
  2. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
  3. IR SENSOR - Recieves IR commands
  4. STANDBY LED
  5. FRONT PANEL DISPLAY
  6. POWER SWITCH- Switches the power on/off


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

For further assistance, try our customer support pages

FAQ

HDMI
The Kiko is only available with HDMI 1.4 connections.
This product does NOT support ARC (Audio Return Channel), CEC or 4K

General operation

The Kiko is ONLY designed to work with supplied speakers. Do not try and change these speaker to another brand.
These speakers do not have a passive crossover, that is an onboard filter to separate the Bass drive unit audio from the treble drive unit audio from the incoming audio. With the Kiko this is performed digitally before feeding out to the speakers. Each speaker drive unit is fed independently from the Kiko to match the supplied speakers crossover points. These cannot be changed.