Difference between revisions of "HDMI"

From LinnDocs
Jump to: navigation, search
Line 3: Line 3:
 
The Linn DSM products provide HDMI pass through of HDMI V1.4 signals
 
The Linn DSM products provide HDMI pass through of HDMI V1.4 signals
  
The Linn DSM products HDMI output will:-
+
The Linn DSM products HDMI output will:-<br>
 
1. Pass-throu the HDMI audio when the Linn DSM is in Standby.<br>
 
1. Pass-throu the HDMI audio when the Linn DSM is in Standby.<br>
 
2. Pass-throu the HDMI audio when the Linn DSM is listening to an Analogue or Digital Audio input.<br>
 
2. Pass-throu the HDMI audio when the Linn DSM is listening to an Analogue or Digital Audio input.<br>

Revision as of 12:50, 22 January 2013

The Linn DSM products provide HDMI pass through of HDMI V1.4 signals

The Linn DSM products HDMI output will:-
1. Pass-throu the HDMI audio when the Linn DSM is in Standby.
2. Pass-throu the HDMI audio when the Linn DSM is listening to an Analogue or Digital Audio input.
3. BLOCK the HDMI audio to the TV if the the DSM is listening to a HDMI input.

ARC - Audio Return Channel

Due to difference in Manufacturers implementation of ARC, the Linn DSM does not support this function

I cannot get any picture through the HDMI

General connections

The Linn DSM does not support 4k resolution

Playstation3

The Playstation3 is known to have HDMI connection issues with many non-Linn devices.

  1. Select PS3 input on the Linn DSM
  2. While the PLAYSTATION 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive power button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light --> green light --> then back to red light). This will ensure that you have held down the power button long enough to reset the Video Output Settings.

Check PS3 FAQ's

Apple MacMini, MacBook Pro etc

If you switch the DSM to the HDMI feed from a MacMini, MacBook etc, it will initially loose any picture and audio, this may take up to 30seconds to appear and for the Audio to return. This delay is due to the Mac performing HDMI communication and re-establishing the audio and video options.

HDMI connection with Video scalers

If you have a video scaler in the HDMI chain and you are not getting any picture through the Linn DSM, take the video scaler out of the system to see if the picture returns.

No Audio playback on HDMI connection

The Linn DSM will ONLY support 2ch (or multichannel) PCM audio, it does not support Dolby Digital, DTS etc. If you feed an unsupported audio from your DVD player/Sat Receiver etc the Linn DSM can pass though to the TV if the DS is in Standby mode but when you select that input on the DSM there is no audio then double check that the audio out on the DVD/Sat is configured for 2ch PCM.

Check Linn forum link

Back