Difference between revisions of "Akurate Music Server Migration Tools"

From LinnDocs
Jump to: navigation, search
 
Line 45: Line 45:
 
* Restart the AMS and run the Kivor GUI software. You may have to re-open the Kivor GUI after the restart as the AMS  will take time to reboot
 
* Restart the AMS and run the Kivor GUI software. You may have to re-open the Kivor GUI after the restart as the AMS  will take time to reboot
  
&nbsp;&nbsp; - Go through the Album listing and delete all albums named Album’xx’.<br>&nbsp;&nbsp; - Put the AMS back into standby.<br>&nbsp;&nbsp; - Recommence the cloning procedure and monitor the database file as point above.
+
&nbsp;&nbsp; - Go through the Album listing and delete all albums named Album’xx’.<br>&nbsp;&nbsp; - Put the AMS back into standby.<br>&nbsp;&nbsp; - Recommence the cloning procedure.
  
 
<br>You cannot copy folders using the Windows Explorer as the AMS database needs to be updated. This can only be done by the cloning procedure.<br>If you keep getting bad Album names, suspect that a hard drive may be failing on the source Kivor and that it may be doing a lot of retries which is causing timeouts. When the AMS senses a timeout it will continue to the next track and the next, etc.
 
<br>You cannot copy folders using the Windows Explorer as the AMS database needs to be updated. This can only be done by the cloning procedure.<br>If you keep getting bad Album names, suspect that a hard drive may be failing on the source Kivor and that it may be doing a lot of retries which is causing timeouts. When the AMS senses a timeout it will continue to the next track and the next, etc.

Latest revision as of 14:29, 6 November 2008

Migration Tools are available from the AMS Web interface.

Media Database Migration Allows a database from another AMS or Kivor to be imported into the currently running AMS.  If the database to be imported was from a Kivor or an earlier version of the AMS the media library will be upgraded to the latest format, (i.e. converting files to FLAC as required.)  The database migration can be started by pressing the Convert button.

Ams MIGRATION.png


Media Library Import Allows an existing FLAC media library to be imported into the AMS database.  To start a media library import, type the path of the media library into the text box.  Then press theImportbutton.  The library to be imported must be on the same NAS as the AMS media.


Data Transfer

Data Transfer Allows the music library of a AMS or Kivor to be imported into the destination AMS. Both devices must be running. To start the transfer, enter the IP address of the source unit and press the Begin Transfer button.


Ams data.png

The screen will change and you will be able to see what is being copied.

If you want to check the status of the copy do not use the Kivor GUI LinnTek.

Do the following:

  • Connect a PC to the network.
  • In Windows Explorer, map the NAS as a network drive (if not already done).
  • Go into the NAS drive, enter the “volume0” folder, then the “backup” folder.
  • There are four files in this folder: the newest one has the latest database information. You can check the datetime stamp on the file to test how new it is. If it is recent (within the last 20 minutes) the cloning is still happening.
    Note: Within Windows Explorer you will have to do the occasional refresh (f5)
    to get the latest information on screen.
  • If you open the newest file you can check that the full details are being passed to the AMS. If this is not happening you can restart the AMS and this will halt the clone.

There are a few points that should be noted:

  • The ripping speed can be up to 500 CDs per day in the best system setup.
  • The faster the Network switch, the faster the cloning time. The NAS and the AMS are normally 1G-Base-T, the Kivor is typically 100Base-T. If you have a multi-function switch, keeping the fastest transfer rate between the AMS and NAS will reduce copy time.
  • An older Kivor may have slower processors and hardware: this may lengthen the cloning time due to the limited processing power. It is not advisable to swap the hard drive to newer hardware, as the operating system may not have the drivers for the new hardware and you may get the drives in the wrong installation order. This will cause a corrupt, unrecoverable database and make the clone operation useless.
  • If it is found that the cloned database has errors (e.g. some albums have been renamed Album’xx’), there are two ways to correct this.
    - Delete all media and repeat the cloning procedure.
    - Switch off the AMS and delete the “Media” shared volume.
    - Recreate the shared volume, effectively wiping it out.
    - Restart the clone. (A Netgear NAS may take some time to delete the shared folder. If you recreate the folder too quickly 

      you will find the original files are still there.)

      or
    - Delete the wrongly named files and restart the cloning. (The AMS will copy the missing files only.)

  • Restart the AMS and run the Kivor GUI software. You may have to re-open the Kivor GUI after the restart as the AMS  will take time to reboot

   - Go through the Album listing and delete all albums named Album’xx’.
   - Put the AMS back into standby.
   - Recommence the cloning procedure.


You cannot copy folders using the Windows Explorer as the AMS database needs to be updated. This can only be done by the cloning procedure.
If you keep getting bad Album names, suspect that a hard drive may be failing on the source Kivor and that it may be doing a lot of retries which is causing timeouts. When the AMS senses a timeout it will continue to the next track and the next, etc.