Akurate Kontrol (Ethernet)

From LinnDocs
Revision as of 16:30, 13 December 2010 by Eamonnb (talk | contribs) (Back Panel Connections)
Jump to: navigation, search
AkurateKontrolFrontTop.jpg

Product info

  • Product Name: Akurate Kontrol
  • Date of Introduction: November 2010
  • Type: Analogue Preamplifier

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

Production Information Sheet

Generic Safety Information

On-line warranty registration

System Setup

Recommended Network setup guide


Back Panel Connections

AkurateKontrolBack.jpg


  1. MAINS INPUT - To connect to the mains supply.
  2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  3. ETHERNET - To connect to a network.
  4. BALANCED INPUTS - To connect sources with balanced (XLR) outputs.
  5. UNBALANCED INPUTS - To connect sources with unbalanced (RCA) outputs.
  6. PHONO INPUT - To connect a turntable source.
  7. PHONO GROUND - To connect to a turntable grounding terminal.
  8. BALANCED VARIABLE OUTPUTS - To connect to a power amplifier with balanced inputs.
  9. UNBALANCED VARIABLE OUTPUTS - To connect to a power amplifier with unbalanced inputs.
  10. UNBALANCED FIXED OUTPUTS - To connect to an analogue recording device.
  11. FALLBACK - To put the device into Fallback mode (used when reprogramming).
  12. BALANCED RIGHT, LEFT - Balanced audio outputs for connection to a pre-amplifier.
  13. ANALOGUE AUDIO OUTPUTS - Line level analogue audio output for connection to a pre-amplifier.

Front Panel Connections

AkurateKontrolFront.jpg
  1. MUTE BUTTON - Mutes/unmutes the audio
  2. VOLUME -/+ BUTTONS - Changes the volume up/down
  3. HEADPHONE OUTPUT
  4. FRONT PANEL DISPLAY
  5. AUX SOURCE INPUT
  6. SOURCE -/+ BUTTONS - Changes to the previous/next source
  7. STANDBY BUTTON - Brings the unit in/out of standby
  8. POWER SWITCH- Switches the power on/off

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Akurate Kontrol.
  • Positioning - Please read the information on positioning your Akurate Kontrol.


For further assistance, try our customer support pages or the Linn Forum.