Difference between revisions of "Akurate Kontrol (Ethernet)"

From LinnDocs
Jump to: navigation, search
(Back Panel Connections)
(Back Panel Connections)
Line 38: Line 38:
 
== '''Back Panel Connections''' ==
 
== '''Back Panel Connections''' ==
  
[[Image:AkurateKontrolBack.jpg|center|700px]] <br>
+
[[Image:AkurateKontrolBack.png|center|700px]] <br>
  
 
# '''MAINS INPUT''' - To connect to the mains supply.
 
# '''MAINS INPUT''' - To connect to the mains supply.

Revision as of 10:13, 14 December 2010

AkurateKontrolFrontTop.jpg

Product info

  • Product Name: Akurate Kontrol
  • Date of Introduction: November 2010
  • Type: Analogue Preamplifier

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

Production Information Sheet

Generic Safety Information

On-line warranty registration

System Setup

Recommended Network setup guide


Back Panel Connections

AkurateKontrolBack.png


  1. MAINS INPUT - To connect to the mains supply.
  2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  3. FALLBACK - To put the device into Fallback mode (used when reprogramming).
  4. ETHERNET - To connect to a network.
  5. BALANCED INPUTS - To connect sources with balanced (XLR) outputs.
  6. UNBALANCED INPUTS - To connect sources with unbalanced (RCA) outputs.
  7. PHONO INPUT - To connect a turntable source.
  8. PHONO GROUND - To connect to a turntable grounding terminal.
  9. BALANCED VARIABLE OUTPUTS - To connect to a power amplifier with balanced inputs.
  10. UNBALANCED VARIABLE OUTPUTS - To connect to a power amplifier with unbalanced inputs.
  11. UNBALANCED FIXED OUTPUTS - To connect to an analogue recording device.

Front Panel Connections

AkurateKontrolFront.png
  1. MUTE BUTTON - Mutes/unmutes the audio
  2. VOLUME -/+ BUTTONS - Changes the volume up/down
  3. HEADPHONE OUTPUT
  4. AUX SOURCE INPUT
  5. SOURCE -/+ BUTTONS - Changes to the previous/next source
  6. STANDBY BUTTON - Brings the unit in/out of standby
  7. POWER SWITCH- Switches the power on/off
  8. FRONT PANEL DISPLAY

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Akurate Kontrol.
  • Positioning - Please read the information on positioning your Akurate Kontrol.


For further assistance, try our customer support pages or the Linn Forum.