Difference between revisions of "Akurate DSM"

From LinnDocs
Jump to: navigation, search
Line 34: Line 34:
  
 
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]
 
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]
 +
 +
== HDMI Setup ==
 +
 +
[[HDMI Setup]]
 +
  
 
== '''Network Setup''' ==
 
== '''Network Setup''' ==
Line 90: Line 95:
 
* '''Positioning''' - Please read the [http://docs.linn.co.uk/wiki/index.php/product_positioning information] on positioning your Akurate DSM.
 
* '''Positioning''' - Please read the [http://docs.linn.co.uk/wiki/index.php/product_positioning information] on positioning your Akurate DSM.
  
<br>For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]
+
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]
 
 
 
 
<br>
 
 
 
== HDMI Setup ==
 
 
 
[[HDMI Setup]]
 

Revision as of 13:35, 20 December 2011

AkurateKontrolFrontTop.jpg

Product info

  • Product Name: Akurate DSM
  • Date of Introduction: November 2011
  • Type: Integrated digital music player and preamplifier

Latest software

Latest software releases

Open source software

Manuals

Quickstart Guide

Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Kinsky Jukebox manual

Safety Information

Warranty Terms and Conditions

HDMI Setup

HDMI Setup


Network Setup

Back Panel Connections

Akurate DSM rear2.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming).
  3. ETHERNET - To connect to a network.
  4. ANALOGUE INPUTS (XLR, line level) - To connect sources with balanced (XLR) outputs.
  5. ANALOGUE INPUTS (RCA, phono/line level) - To connect a turntable or line level source with unbalanced (RCA) outputs*.
  6. PHONO GROUND - To connect to a turntable grounding terminal.
  7. ANALOGUE OUTPUTS (XLR,variable level) - To connect to a preamplifier with balanced (XLR) inputs.
  8. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
  9. DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
  10. DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
  11. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
  12. DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
  13. HDMI INPUTS - To connect sources with HDMI outputs.
  14. HDMI OUTPUT - To connect to a display device with HDMI inputs.
  15. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.


* Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.


Front Panel Connections

Akurate DSM front.jpg
  1. MUTE BUTTON - Mutes/unmutes the audio
  2. VOLUME ADJUST BUTTONS - Changes the volume up/down
  3. SOURCE SELECT BUTTONS - Changes to the previous/next source
  4. SLEEP BUTTON - Brings the unit in/out of sleep mode
  5. FRONT PANEL DISPLAY
  6. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
  7. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
  8. POWER SWITCH- Switches the power on/off


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Akurate DSM.
  • Positioning - Please read the information on positioning your Akurate DSM.

For further assistance, try our customer support pages or the Linn Forum.