Akurate DS

From LinnDocs
Revision as of 08:10, 23 December 2020 by Yoda (talk | contribs) (Front Panel)
Jump to: navigation, search
AkurateDS Silv 3Q cropped.jpg

Product info

  • Product Name: Akurate DS/0 (Variant 2007)
Other variants of this product can be found at Akurate DS varinats
  • Date of Introduction: November 2007
Replaced by the Akurate DS/1 in 2010
  • Type: Digital music player

Support

Linn Support Site

Latest software

Latest software releases

Details of latest Product release software

Manuals

Controlling the product User Guide

Product setup:Manage Systems user manual

Space Optimisation (Advanced)

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

Network Setup

Back Panel Connections

Akurate DS rear v2.jpg


  1. MAINS INPUT - To connect to the mains electricity supply.
  2. MAINS INPUT - To connect to the mains electricity supply.
  3. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  4. ETHERNET - To connect to a network (100Base-T)
  5. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  6. RS232 PORTS - To connect to other Linn products without ethernet ports.
  7. BALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
  8. UNBALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.

Front Panel

Akurate DS front.jpg
  1. DISP BUTTON - Changes the front panel display mode.
  2. FRONT PANEL DISPLAY
  3. SLEEP BUTTON - Brings the product in/out of sleep.
  4. SKIP TRACK BUTTONS - Skips to the previous/next track
  5. STOP/PLAY BUTTONS - Stops or Starts the current track

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.


Front display information

Akurate FP display.png

Key points

  • "No Network/LAN" indicates that the Linn DS/DSM/HUB does not have a live computer network connection. This can simply be that the cable is loose or that your computer network/LAN is off/not connected.
  • ! indicates that the Linn DS/DSM/HUB is expecting to see all of the pre-configured Exakt devices, (Exakt speakers, Exakrbox.., Urika-II) connected but it cannot see them. This is typically because the Exakt devices are physically disconnected from the Exakt-link network, they physically have no power going to them or the Linn DS/DSM/HUB has prevously been configured for these products but have not been removed from its setup.

FAQ's

Check:


For further assistance, try our customer support pages