Difference between revisions of "AMS Upgrade procedure"

From LinnDocs
Jump to: navigation, search
Line 3: Line 3:
 
This should ONLY be performed by Registered Linn Retailers<br>
 
This should ONLY be performed by Registered Linn Retailers<br>
  
* Create a CD-ROM from the '''rkrsv410-5.iso''' file (http://products.linn.co.uk/VersionInfo/Downloads/AkurateMusicServer_0101.iso )<br>
+
* Create a CD-ROM from the '''AkurateMusicserver_0101.iso''' file (http://products.linn.co.uk/VersionInfo/Downloads/AkurateMusicServer_0101.iso )<br>
 
* Turn the AMS( Akurate Music Server )off.
 
* Turn the AMS( Akurate Music Server )off.
 
* Connect a monitor and keyboard to the AMS.<br>
 
* Connect a monitor and keyboard to the AMS.<br>

Revision as of 13:55, 12 November 2008

Performing the upgrade

This should ONLY be performed by Registered Linn Retailers

  • Create a CD-ROM from the AkurateMusicserver_0101.iso file (http://products.linn.co.uk/VersionInfo/Downloads/AkurateMusicServer_0101.iso )
  • Turn the AMS( Akurate Music Server )off.
  • Connect a monitor and keyboard to the AMS.
  • Turn ON the AMS and insert the CD-ROM into the AMS drive. This will begin the auto install .
  • You will be prompted to press I for a clean install. For the serial number leave blank ,press return, and then Y
  • The install will now begin and take a few minutes the CD-ROM will eject when complete.
  • Leave the AMS for another 10-15 minutes and use the KivorGUI or Internet explorer to check status.
  • Access the AMS web interface by typing the unit's IP address into a web browser
  • Click on the “Network and Device Configuration”
  • Verify the settings. If you make any changes hit the SAVE button
  • Installation of the Rekursive Software is now complete.