Difference between revisions of "AMS Upgrade procedure"
| Line 1: | Line 1: | ||
== '''Performing the upgrade'''<br> == | == '''Performing the upgrade'''<br> == | ||
| − | * Create a CD-ROM from the '''rkrsv410-5.iso''' file <br> | + | This should ONLY be performed by Registered Linn Retailers<br> |
| + | |||
| + | * Create a CD-ROM from the '''rkrsv410-5.iso''' file (http://products.linn.co.uk/VersionInfo/Downloads/AkurateMusicServer_0101.iso )<br> | ||
* Turn the AMS( Akurate Music Server )off. | * Turn the AMS( Akurate Music Server )off. | ||
* Connect a monitor and keyboard to the AMS.<br> | * Connect a monitor and keyboard to the AMS.<br> | ||
Revision as of 08:25, 12 November 2008
Performing the upgrade
This should ONLY be performed by Registered Linn Retailers
- Create a CD-ROM from the rkrsv410-5.iso file (http://products.linn.co.uk/VersionInfo/Downloads/AkurateMusicServer_0101.iso )
- Turn the AMS( Akurate Music Server )off.
- Connect a monitor and keyboard to the AMS.
- Turn ON the AMS and insert the CD-ROM into the AMS drive. This will begin the auto install .
- You will be prompted to press I for a clean install. For the serial number leave blank ,press return, and then Y
- The install will now begin and take a few minutes the CD-ROM will eject when complete.
- Leave the AMS for another 10-15 minutes and use the KivorGUI or Internet explorer to check status.
- Access the AMS web interface by typing the unit's IP address into a web browser
- Click on the “Network and Device Configuration”
- Verify the settings. If you make any changes hit the SAVE button
- Installation of the Rekursive Software is now complete.
