Akurate Kontrol (Ethernet)
Contents
Product info
- Product Name: Akurate Kontrol
- Date of Introduction: November 2010
- Type: Analogue Preamplifier
- Features
Latest software
Manuals
Production Information Sheet, including Product Specifications
System Setup
Recommended DS Network setup guide
Back Panel Connections
- MAINS INPUT - For connection to the mains supply.
- EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
- ETHERNET - For connecting the unit to the network.
- BALANCED INPUTS - For connecting the unit to the network.
- UNBALANCED INPUTS - For connecting the unit to the network.
- UNBALANCED PHONO INPUT - For connecting the unit to the network.
- UNBALANCED VARIABLE OUTPUTS - For connecting the unit to the network.
- UNBALANCED FIXED OUTPUTS - For connecting the unit to the network.
- FALLBACK - Used when reprogramming the unit.
- RS232 PORTS - For connection to Linn source products without ethernet ports.
- BALANCED RIGHT, LEFT - Balanced audio outputs for connection to a pre-amplifier.
- ANALOGUE AUDIO OUTPUTS - Line level analogue audio output for connection to a pre-amplifier.
Front Panel Connections
- MUTE BUTTON - Mutes/unmutes the audio
- VOLUME -/+ BUTTONS - Changes the volume up/down
- HEADPHONE OUTPUT
- FRONT PANEL DISPLAY
- AUX SOURCE INPUT
- SOURCE -/+ BUTTONS - Changes to the previous/next source
- STANDBY BUTTON - Brings the unit in/out of standby
- POWER SWITCH- Switches the power on/off
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- Unpacking - Please read the information on unpacking your Akurate Kontrol.
- Positioning - Please read the information on positioning your Akurate Kontrol.
For further assistance, try our customer support pages or the Linn Forum.
