KlimaxSolo:Auto-Standby

From LinnDocs
Revision as of 14:34, 22 May 2025 by Yoda (talk | contribs) (Created page with ":This allows more settings in the Auto-Standby function and overall power used. ::<big><b>3</b></big>: <b><i>No</i></b> auto-standby. (Never enters Low-Power mode) ::<big><b>2...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
This allows more settings in the Auto-Standby function and overall power used.
3: No auto-standby. (Never enters Low-Power mode)
2: "Shallow" auto-standby after 20 minutes without a signal. Almost immediate audio upon waking up.
1: "Deep" auto-standby after 20 minutes without a signal. Audio will take a few seconds before waking up.
Note:
12V Trigger and Auto-Standby behaviour
  • with 12V trigger plugged in and not enabled, Solo 500 will be in "Deep" standby.
  • with 12V trigger enabled, amp will go into running state but will go into deep or shallow after 20 minutes without signal if switch position 1 or 2.
  • with switcn in position 3, amp standby will be fully controlled by 12V trigger in.
Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=KlimaxSolo:Auto-Standby&oldid=31346"