Template:Backpanel:Majik DSM 2025

Majik DSM (2025 variant)

1. MAINS INPUT - To connect to the mains electricity supply.
2. FALLBACK - To put the device into Fallback mode (used when reprogramming)
3. ETHERNET - To connect to a network (100Base-T)
4. USB-B socket - To connect to a PC/MAC for Class 2.0 PCM Asynchronous USB Audio playback ⁶
5. HDMI eARC (HDMI) - To connect to a TV (This Majik DSM supports Audio Retun Channel (ARC))
6. EXAKT LINK- To connect to Exakt compatible devices (Exaktbox, Exakt Speakers, Urika II)
7. DIGITAL INPUT (Toslink)⁵ - To connect sources with Toslink (optical) digital outputs.
8. DIGITAL INPUT/OUTPUT (Spdif)⁵ - To connect sources with SPDIF (RCA) digital outputs. This can be configured as an SPDIF output with no volume control
9. PHONO GROUND - To connect to a turntable grounding terminal.
10. ANALOGUE INPUT (RCA MC )³ - To connect to source with RCA analogue output.
11. ANALOGUE INPUT (RCA MM )³ - To connect to source with RCA analogue output.
12. ANALOGUE INPUT (Line Level )^{1 & 2} - To connect to source with RCA analogue output.
    
13. SUB OUT OUTPUTS (RCAline level) - For Stereo Bass Reinforcement
14. ANALOGUE OUTPUTS (RCA, variable level)⁴ - Volume controlled output to connect to an optional external power amplifier.
15. SPEAKER OUTPUTS - To connect to loudspeakers⁷
16. POWER SWITCH - Mains power switch

Reference:

¹ Analogue input (Default setting)

Voltage: 2V rms,

Input impedance 10kΩ

² with ADC of 192kHz/24bit

³ RCA MM:

MM input impedance 47k, 100pf

MM voltage (1kHz): 67mV rms. (Gain +40dB)

MC input impedance 100Ω 470p

MC max voltage (1kHz): 5.5mV RMS (Gain +54dB)

⁴ Volume controlled Analogue Output:

RCA - 2V rms, 300Ω

This can only be made fixed level by disabling the Volume control and subsequently disabling the Power Amplifier.

⁵ Digital inputs: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

SPDIF1 can be converted to a 2-channel SPDIF OUTPUT, audio that will support up to 192KHz via Manage Systems

• This output is a fixed volume control output..
• Only supports FL/FR channel output. (even if playing Surround audio)

SPDIF2 is ALWAYS a SPDIF INPUT and CANNOT be configured as a SPDIF output.

⁶ USB Audio Class 2 Supported Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

⁷ Max output power:

100W/channel into 4Ω load,

50W / channel into 8Ω load

⁸HDMI 2.0 Supports HDCP 2.2 up to and including 60Hz UHD. Linn recommend using Premium High Speed Certifiied HDMI cables for an optimal experience.