Template:Backpanel:Selekt Edition DSM with Mono Line-level cartridge
Selekt DSM with two Mono Line cartridges
Information of what each connector is and a basic specification of these connectors
Click for more....
- MAINS INPUT - To connect to the mains electricity supply.
- FALLBACK - To put the device into Fallback mode (used when reprogramming)
- POWER SWITCH - Mains power switch
- ETHERNET - To connect to a network (100Base-T)
- HDMI ARC - To connect to a TV Audio Return Channel (ARC) connection
- USB-B socket - To connect to a PC/MAC for Class 2.0 PCM Asynchronous USB Audio playback 6
- TOSLINK DIGITAL INPUTS 5- To connect sources with Toslink digital outputs.
- SPDIF DIGITAL INPUTS/OUTPUT 5 - To connect sources with Spdif (RCA) digital outputs or input.
- ANALOGUE INPUTS (RCAline level)1 & 2 - To connect sources with RCA analogue outputs.
- SUB OUT OUTPUTS (RCAline level) - For Stereo Bass Reinforcement or Redirect when used with Selekt Cartridges
- ANALOGUE INPUTS (RCA MM/MC)2 & 3 - To connect a turntable with unbalanced (RCA) outputs.
- EXAKT LINK- To connect to Exakt compatible devices (Exaktbox, Exakt Speakers, Urika II)
- PHONO GROUND - To connect to a turntable grounding terminal.
- 14 & 15 MONO RCA/XLR LINE OUTPUTS - (XLR & RCA,variable level)4 - To connect to a power amplifier.
Notes:
1 Analogue inputs: Input range adjustable 1V-4V rms, 10kΩ impedance
2 with ADC of 192kHz/24bit
3 RCA MM/MC:
- MM input impedance 47k, 100pf
- MM max voltage (1kHz): 67mV rms. (Gain +40dB)
- MC input impedance 100Ω 470p
- MC max voltage (1kHz): 5.5mV rms (Gain +54dB)
4 Analogue Output:
- RCA - 2V rms, 300Ω
- XLR - 4V rms, 600Ω
5 Digital inputs: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- SPDIF1 can be converted to an SPDIF output that will support up to 192KHz. This output is a fixed volume control output, that is, Volume Up/Down had no effect on this output of the FL/FR channels only.
6 USB Supported Sample rates: 44.1, 48, 88.2, 96, 176.4, 192
