PcmSurround

DSM Surround Sound without DSP module

Non-encoded (PCM) surround audio playback is supported by the following DSM players

• Any DSM with HDMI and/or HDMI eARC inputs and Exakt outputs
• Selekt DSM (Classic and Edition) with 2 or more 2-channel modules

NOTE that playback of PCM surround audio using SPDIF or TOSLINK inputs is NOT supported

Definitions

• Source: Any device which can supplies audio to the DSM HDMI input
  • Set-top boxes such as SkyQ, Apple TV etc.
  • Streaming devices such as Amazon Firestick, Chromecast, Roku etc.
  • Blu-ray players
• TV: Any video output device
  • Television
  • Projector

Configurations

• Source -> DSM HDMI input : DSM HDMI out -> TV
• TV HDMI eARC out -> DSM HDMI out
• Source -> TV HDMI input : TV HDMI eARC out -> DSM HDMI

(1) Source -> DSM HDMI input : DSM HDMI out -> TV

[ insert a diagram here ]

In this case the source device must supply PCM surround audio to the DSM over HDMI

• For native PCM media this needs to be output without change
• For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio and then output to the DSM over HDMI

(2) TV HDMI eARC out -> DSM HDMI out

[ insert a diagram here ]

(3) Source -> TV HDMI input : TV HDMI eARC out -> DSM HDMI

[ insert a diagram here ]

NOTE that due to the vast array of available source and TV devices it is impossible for Linn to specify whether any given setup will function as required. Even within devices from any given manufacturer there are different hardware and software variants which can affect this functionality.

Examples

[ insert concrete tested and working example of each scenario, with source / TV settings ]

Testing

Other than setting up the system and listening to it, using variety of media sources (netflix vs prime vs disc etc) is there any clever/easier way to test this - I suspect not

Do any of streaming services offer 'test' media to make setup easier, rather than just using some random movie???