Template:ModuleInfo:SELEKT DSM CARTRIDGE - 1Ch LINE OUT
SELEKT DSM CARTRIDGE - 1Ch LINE OUT
Description:
- Each cartridge has ONE line-level audio channel that is sold and fitted in pairs for use in left & right hand channel playback.
- Each channel has a XLR and a RCA output. BOTH can be used simultaneously. That is, both XLR and RCA socket are always live and do not effect each others performance.
DAC - Mono Digital to Analogue Convertor module option
Option 3: | Organik (Level-3) |
Line Output:
RCA: | |||
Output Level: | 2V rms @volume 80 | ||
Output Impedance: | 300Ω |
XLR | |||
Output Level: | 4V rms @volume 80 | ||
Output Impedance: | 600Ω |
Note:
- When using two of these Mono cartridges you CANNOT fit/use another cartridge within this Selekt DSM.
- DAC's are sold seperately and ONE DAC module MUST be fitted to the the cartridge to get audio from this cartridge.
- Different DAC's modules can be used with each Selekt Cartridge.
- Either
- Standard (Level-1) Stereo DAC is the standard DAC.
- or
- Katalyst (Level-2) Stereo DAC use the higher specification Katalyst DAC Architecture
- or
- Organik (Level-3) Stereo or Mono DAC use the higher specification Organik DAC Architecture
- Either
- Only one type of DAC module can be installed in each cartridge.
- That is, You CANNOT have a Standard and a Katalyst DAC module installed in the same Line-level, Power-amplifier or Hybrid 1.1 catridge at the same time.
- These Standard and Katalyst DAC modules are interchangeable in different cartridges in the same Selekt DSM.
- However Organik DAC modules CANNOT be used with Standard and Katalyst DAC modules in different cartridges, in the same Selekt DSM
- The Organik MONO DACs can ONLY be used in the Mono Line Out Cartridge
- You CANNOT mix Organik Stereo cartridges with Organik Mono Line Out Cartridges
- Warning: Changing Selekt Cartidge(s) or Module(s).
-
- Applies to: All Selekt DSM variants
- To reduce the risk of damage to your Selekt DSM:
- The Selekt DSM MUST be disconnected from Mains power supply by BEFORE any cartridge(s) or module(s) are removed/Inserted.