Majik DSM (HDMI 2 Variant)
Contents
Getting Started
Product info
- Product Name: Majik DSM/3
- Date of Introduction: Sept 2016
- Type: Integrated digital music player, preamplifier and power amplifier
- Features
Support
Latest software
Manuals
Third Party Software Copyright
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- HDMI INPUTS - To connect sources with 1.4 & 2.0 HDMI outputs. .
- HDMI OUTPUT - To connect to a display device with 1.4 & 2.0 HDMI inputs.
- EARTH GROUND - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
- DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
- DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
- DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
- DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
- ETHERNET - To connect to a network.
- FALLBACK - To put the device into Fallback mode (used when reprogramming)
- ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).
- ANALOGUE OUTPUTS/INPUTS (RCA, variable level) This is configurable in Konfig
- To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs (Default)
- or use in internal Majik DSM power amplifer for use with an Exakt Crossover.
- ANALOGUE OUTPUTS (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.
- SPEAKER OUTPUTS - To connect to loudspeakers
- EXAKT LINK - To connect to Exakt compatible devices
EXAKT LINK connection
Check HERE for information of Exakt link connection
Front Panel Connections
- MUTE BUTTON - Mutes/unmutes the audio
- FRONT PANEL DISPLAY
- SLEEP BUTTON - Brings the unit in/out of sleep mode
- VOLUME ADJUST BUTTONS - Changes the volume up/down
- HEADPHONE OUTPUT (3.5mm stereo) - To connect to headphones
- AUXILIARY SOURCE INPUT (3.5mm stereo) - To connect to an analogue stereo audio source
- SOURCE SELECT BUTTONS - Changes to the previous/next source
- POWER SWITCH- Switches the power on/off.
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
Trouble shooting
Check Exakt trouble shooting
For further assistance, try our customer support pages or the Linn Forum.
