Klimax DSM (Exakt Variant)

MAINS INPUT - To connect to the mains electricity supply.
TOSLINK IN- To connect sources with Toslink (optical) digital outputs.
ETHERNET - To connect to a network.
SPDIF IN - To connect sources with Spdif digital outputs.
EXAKT LINK- To connect to Exakt compatible devices
EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
BALANCED IN RIGHT, LEFT - To connect sources with balanced (XLR) outputs*.
BALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
UNBALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
HDMI OUT - To connect to a display device with HDMI inputs.
HDMI IN 1, 2, 3 - To connect sources with HDMI outputs.
FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).

* XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs. Input transformer can be enabled or disabled in Konfig setup

Changes to Klimax DSM/1 compared to the Klimax DSM/0

- 2off Exakt link sockets - To connect speakers/Tuneboxes with Exakt Link. This will allow audio from both the Analogue output and Exakt outputs.
- 1off SPDIF input - The Klimax DSM/0 has 2off SPDIF inputs

Front Panel

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

For further assistance, try our customer support pages or the Linn Forum.

Exakt usage the the Exakt Klimax speakers can be found at Klimax Exakt System