Majik DSM /2 (2015 Variant)

Majik-DSI / DSM variants:

• How to id your variant?
  
• Majik-DSI Original
  
• Majik DSM Original
  
• Majik DSM/1 HDMI Variant
  
• Majik DSM Exakt Variant
  
• Majik DSM/ HDMI2 Variant
  
• Majik DSM/ Class-D Variant
  

Linn Majik DSM
(2015 Variant) with Exakt Technology

Product info

• Product Name: Majik DSM/2 (2015 Variant)

Other variants of this product can be found at Majik DSM Variants

• Date of Introduction: April 2015 - Sept 2016

Replaced by Majik DSM/3 (2016 / 2018 Variant) with HDMI 2.0 in 2016

• Type: Integrated digital music player, preamplifier and power amplifier

• Features
  • DS Design
  • Chakra Power
  • Dynamik Power Supply
  • Aktiv Operation
  • Source Unity Gain option
  • Exakt connections and Space Optimisation
  • Phono/Turntable input stage
  • EXAKT
  • Surround Sound (with LPCM surround ONLY)

Hardware Upgrades

HDMI 2.0 Upgrade

Note:

• The Linn Surround module is NOT Supported in this product.
• It should be noted that information may at times be out of date and should not be used as a current list of what upgrades are available.

Support

Linn Support Site

Latest software

Latest software releases

Details of latest Product release software

Manuals

Quickstart Guide

Using the Linn DS/DSM/HUB with IR handset, PC, MAC, Android tablet, iPad/iPhone...

Remote Control manual

Manage Systems manual

Space Optimisation (Advanced)

Surround Sound with Exakt systems

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

Network Setup

• General Networking

Back Panel Connections

1. MAINS INPUT - To connect to the mains electricity supply.
2. HDMI INPUTS - To connect sources with 1.4 HDMI outputs
3. HDMI OUTPUT - To connect to a display device with 1.4 HDMI inputs.
4. EARTH GROUND - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
5. DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
6. DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
7. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
8. DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
9. ETHERNET - To connect to a network (100Base-T).
10. FALLBACK - To put the device into Fallback mode (used when reprogramming)
11. ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs ^3,5. Input 4 ⁴' is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).
12. PRE OUT/PWR IN (RCA, configurable in Konfig)
    • PRE OUT
      1. Variable Connect to a power amplifier with unbalanced (RCA) inputs (default)
      2. Fixed (line level) Connect to a preamplifier with unbalanced (RCA) input
      
      
    • PWR IN: Use as a direct input to the internal Majik DSM power amplifer for use with an Exakt setup (ie system with an Akurate Exaktbox 6 and an existing 4 channel amp. This allows you to make use of the Majik DSM's internal power amp for an additional 2 amplified channels).
    
    
    • KONFIG SETTINGS FOR PRE OUT/PWR IN USE CASES

      Setup	Exakt Channel Allocation	Internal Volume Control	Pre Out/Power In Connector Mode	DUAL Analogue/Exakt Stereo	Notes
      Preout/Variable (Default)	None	Enabled	PRE OUT1	Disabled	Analogue out to power amp
      Preout/Variable	Left, Right	Enabled	PRE OUT1	Enabled	Exakt out and analogue out but out of sync
      Preout/Fixed	None	Disabled	PRE OUT1	Disabled	Analogue out to preamp, poweramp disabled
      Preout/Fixed (Invalid)	Left, Right (N/A)	Disabled	PRE OUT1	Enabled	No Exakt out when volume control is disabled
      PwrIn	None	Enabled	PWR IN2	Disabled	Use case: Akurate DS, Majik DSM as power amp only
      PwrIn	Left, Right	Enabled	PWR IN2	Enabled	Example use case: AK ExaktBox, Majik 4100
      PwrIn (Invalid)	None	Disabled	PWR IN2	Disabled	Power amp disabled when volume control disabled
      PwrIn(Invalid)	Left, Right	Disabled	PWR IN2	Enabled	Power amp disabled when volume control disabled

      
      
13. ANALOGUE OUTPUTS (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.
14. SPEAKER OUTPUTS - To connect to loudspeakers
15. EXAKT LINK - To connect to Exakt compatible devices

¹ 'PRE OUT' option formerly labelled (incorrectly) as 'Input' in Konfig
² 'PWR IN' option formerly labelled (incorrectly) as 'Output' in Konfig
³ With ADC of 96kHz/24bit
⁴ MM Phono stage. Max input voltage 50mV rms 47k&#937, 68pF
⁵ Analogue inputs: Input range adjustable 1V-4V rms, impedance 10kΩ

EXAKT LINK connection

Check HERE for information of Exakt link connection

Front Panel Connections

1. MUTE BUTTON - Mutes/unmutes the audio
2. FRONT PANEL DISPLAY
3. SLEEP BUTTON - Brings the unit in/out of sleep mode
4. VOLUME ADJUST BUTTONS - Changes the volume up/down
5. HEADPHONE OUTPUT (3.5mm stereo) - To connect to headphones
6. AUXILIARY SOURCE INPUT (3.5mm stereo) - To connect to an analogue stereo audio source
7. SOURCE SELECT BUTTONS - Changes to the previous/next source
8. POWER SWITCH- Switches the power on/off.

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking Information

• Positioning Information

• Amplifier Protection

• Configurable Phono Stage

Features

Tidal

Tidal

Click for more....

Tidal This will work with Linn DS/DSM products running Davaar23 firmware. This can be updated using the Konfig software.

To create and add Tidal tracks to a Linn DS/DSM playlist, you require Kazoo or Linn App

Tidal is supported in countries listed HERE on the Tidal website

Check for Tidal FAQ's with Linn DS/DSM

Qobuz

Qobuz

Click for more....

Qobuz Streaming CD or Hi-Res quality music

To create and add Qobuz tracks to a Linn DS/DSM playlist you require Kazoo or Linn App

Check for Qobuz FAQ's with LInn DS/DSM

Calm Radio

Calm Radio

Click for more....

Calm Radio "Music that helps you get through the day "

To create and add Calm Radio tracks to a Linn DS/DSM playlist you require Kazoo or Linn App

Check Check for Calm Radio FAQ's with Linn DS/DSM

Spotify Connect

Spotify Connect

Click for more....

Spotify Connect can now be used on Linn products using firmware Davaar59 (Aug 2017) or later firmware. (That is, if your Linn DS/DSM has had a software update after Aug 2017 then you can use Spotify connect)

This allows you to select and play your Spotify music on your Linn DS/DSM players and use the internal volume control on the Linn DS/DSM.

To connect your Spotify account to the Linn DS/DSM:

1. On your control device, iPad/Android/PC/MAC etc, connect to the same computer network as your Linn DS/DSM
2. Start your Spotify app, (if it is already open then close the App, wait a few seconds, and open the App)
3. Now check the Spotify Speakers icon to find your Linn DS. (In some cases you may have to power cycle your Linn DS/DSM before this is seen)
4. Select your Linn product, and you can now play to the Linn DS/DSM from the Spotify account and control the Linn DS/DSM volume.

This is web controlled and if your Linn DS/DSM has already been paired with your Spotify account you will be able to control even if you are not on the same ethernet network.(So be careful that if you accidentally select the Linn DS/DSM as a Spotify speaker and put the volume up high, and you are not at home)

Check FAQ Spotify Connect for more information.

Roon

"Roon Tested"

Click for more....

from Davaar 106 onwards, (March 2024 >), the following products are also Roon Ready and support RAAT audio distribution:

▼ Roon Ready   Klimax DSM /3 (2020 Variant)   Kustom DSM   Majik DSM /4 (2020 Variant)   Selekt DSM /0   Selekt DSM /0 Classic Hub   Selekt DSM /1 Classic Hub   Selekt DSM /1 Edition Hub   Series 3 RAAT is also included with Linn DS/DSM's updated to Organik DAC's

Change Roon Protocol to Roon Ready in Manage Systems > Music tab.

This will also allow you to decide, if the Linn DS/DSM supports has the DACs to support DSD playback, which products decode the DSD. Either Roon decoding or Linn DS/DSM direct playback.

All Linn DS/DSM ARE ROON CERTIFIED devices

The Linn DS/DSM requires Davaar63 (May 2018) or later firmware to work with Roon V1.5 and above.(That is, if your Linn DS/DS/HUB has had a software update after May 2018 then you can use Roon)

This allows full hi-res audio, (192k/24bit) playback controlled by the Roon system

Songcast is used to share audio between Linn Products when using Roon. It does not use RAAT (Roon Advanced Audio Transport) for sharing Music, so cannot be set up as a Roon-Ready sharer.

Roon Tested Setup
On Linn DS proxy setups, Linn DS with Linn Kontrol preamplifier connected with RS232, the Roon volume control will not control the Linn Kontrol volume.
A Roon Core is required in your network system to allow Roon to control your Linn DS/DSM.
ENABLE the Linn DS/DSM player in the Roon - Settings - Audio - NETWORKED section.
In the Settings > Setup make sure that the Subnet of Linn Streaming is the same as the network that the Linn DS is on. Otherwise, they will not show in the Audio

Control
Primary control is through Roon.
:Transport IR is disabled on the Linn DS/DSM when the Roon input is selected from Linn DS firmware release Davaar80 (Nov 2020)

Issues
Roon uses the Linn DS/DSM as a media player, the control interface IS Roon.

• I cannot see any Linn DS in the Audio list...

If you cannot see any Linn DS product in the Audio list then check that with the setup the correct Linn Streaming subnet (network address range).

E.g. if your Linn DS has IP address 192.168.1.34 then its subnet is 192.168.1.0

• I am only getting Airplay quality audio from the Linn DS using Roon

In Roon: Settings - Audio setup page, you will have devices listed with "via Linn Streaming" and devices listed with "via Airplay".

Pressing this ENABLE button on "via Linn Streaming" will bring this Linn DS player alive.

When you press ENABLE, this will then allow you to rename this Linn DS, otherwise it will be its default name. E.g. below the "Linn Akurate DSM" - "via Linn Streaming" has been enabled and I have renamed it "Merlin Lounge".

The Linn DS/DSM products have to be declared as "Roon Tested", networked devices in the Roon Core settings. (The "AIRPLAY" option for the Linn DS/DSM must be disabled within the Roon Core).

Click on the Roon Ready - Enable and give a name to the Linn DS/DSM. (In the example below, this has been named Merlin Lounge)

• I press STOP and the Roon starts playing again...

Transport (play / pause / stop) and Volume can be controlled using Kazoo or Ir handset. Although later versions of Roon will counteract these commands. Only use the Roon controller software to control what is playing.

Linn DS Firmware Davaar80 onwards will disable transport controls whilst on the Roon input of the Linn DS/DSM

• If I select an external source whilst playing Roon, I need to reselect the source to get it playing.

This can be due to a confusion, as the Roon will send a stop command to the Linn DSM as you exit the Roon source. However, as the Linn DSM will probably have changed to this new source, then this new source is stopped by Roon. On external sources, this can only be recovered by selecting another source and going back to the originally selected source.

The solution is to Stop or Pause the Roon source BEFORE you change to a different input on the Selekt DSM.

This can also be reduced by going into Konfig or Manage systems and disabling the "AutoPlay" option.

Deezer

Click for more....

This can now be used on Linn products using firmware Davaar82 (July 2021) or later firmware.

To create and add Deezer tracks to a Linn DS/DSM playlist you require the Linn App

This function is NOT available on the Kazoo or Kinsky Apps

The Deezer is broadcast from the Internet straight to the Linn DS/DSM and you use the Linn App to select and play the Music on the Linn DS/DSM.

Check for Deezer FAQ's with Linn DS/DSM

AIRPLAY

Airplay

Click for more....

AirPlay is a Apple protocol that allows wireless streaming media.

The Linn DS/DSM/HUB can take the audio stream via the "Netlink" input.

Check <HERE> for any issues with Airplay

FAQ's

Check:

• FAQ-Linn DS/DSM
• FAQ-Majik DS
• Exakt trouble shooting

For further assistance, try our customer support pages