TroubleShooting:Selekt DSM
Selekt DSM issues
Selekt DSM does not produce any sound from the cartridge(s)
- Using Konfig
- 1. Make sure that your Selekt DSM is powered on and connected to a network with internet access
- 2. In Konfig, select your DSM and go into the Exakt or Speakers tab
- a) In the Speakers configuration box, click on the FALLBACK button. This will put the Selekt backplane into fallback mode.
- b) After a few moments, a RESTORE button should appear in the Speakers configuration box. Press this RESTORE button.
- c) Let it go through the programming steps (there's a progress indicator at the bottom of screen).
- 3. When it's finished:
- a) Power cycle the Selekt (Do NOT use the Reboot option in Konfig).
- b) Set up the speaker info and see if normal operation has returned.
- c) If not, please contact Linn Helpline.
