Series 3 Setup

From LinnDocs
Revision as of 08:51, 25 October 2019 by Yoda (talk | contribs) (Mono or Stereo operation)
Jump to: navigation, search


Linn Setup Guide:
How to set up the Linn Series 3 loudspeaker

Series 3 System Stereo Pair.png

Full Table of Contents / Index      Click to Show / Hide.....

Contents

Product info

  • Product Name: Series 3 Loudspeaker
301 - All-In-One Wireless speaker & digital Music player
302 (partner) - Exakt speaker
  • Date of Introduction: October 2019
  • Type: Integrated digital music player, pre-amplifier and power amplifier
  • Versions: None
  • Features
Digital streaming via Bluetooth, Wi-Fi & Airplay
Connect TV via HDMI ARC
Exakt Technology
On-board Amplification
Connect a partner speaker via Exakt Link to create a stereo system

Initial Setup

If you have just received this Linn product then you will be eager to listen to the Music. This section will show you how to unpack it, wire it up, position it and get Music playing...

The Series-3 301 speaker can be used alone for Mono playback or with the Series-3 302 speaker wired, using a CAT-5 Exakt-Link cable, for Stereo playback.

Unpacking

Remove the Series-3 (301) from the packing and check you have all of the accessories.
Now place the product you want it to be.

REQUIRED CONNECTION
1. A mains power socket


Wiring

Series3-301 back panel

Series3-301 backpanel-400px.png
View Series3-301 connection detail
Information of what each connector is and a basic specification of these connectors

Click for more....
  1. ETHERNET - To connect to a network (100Base-T)- Not required if you are only using Bluetooth and/or Wifi connections
  2. EXAKT LINK - To connect to Exakt compatible devices (Exaktbox, Exakt Speakers, Urika II etc) - to Partner with a Series3-302
  3. HDMI ARC (HDMI) - To connect to a TV Audio Return Channel (ARC) connection
  4. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  5. MAINS INPUT - To connect to the mains electricity supply.
  6. POWER SWITCH - Mains power switch



Series3-302 partner backpanel

Series3-302 backpanel-400px.png
View Series3-302 partner speaker connection detail
Information of what each connector is and a basic specification of these connectors

Click for more....
  1. EXAKT-LINK - connection to Series3-301 speaker
  2. EXAKT LINK - To connect to Exakt compatible devices (Exaktbox, Exakt Speakers, Urika II etc) - connection to other Exakt-link applicable products
  3. SERVICE PORT For Linn service only
  4. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  5. MAINS INPUT - To connect to the mains electricity supply.


HDMI-ARC audio only setup

HDMI-ARC only (using the Series 3 as a TV Sound bar)

This setup will allow:
  • The Series3-301 to receive Mono audio and volume control from the HDMI-ARC connection from the TV. (The Series3 volume buttons will also control the volume)
Series3-wiring-HDMi ARC only.png

HDMI-ARC only (using the Series 3 as a Stereo TV Sound bar)

This setup will allow:
  • The Series3-301 to receive Stereo audio and volume control from the HDMI-ARC connection from the TV. (The Series3 volume buttons will also control the volume)
Series3-wiring-HDMi ARC only Stereo.png

Configure for use with Series3-302 partner speaker

      Series3-Configure-125px.gif‎ Add/Remove a Partner speaker setup procedure

(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) :

1. Connect or remove the Series3-302 speaker as required:
     * Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302
     * Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302
2. Press and HOLD both buttons PIN-1.png & PIN-6.png on the Series3-301 until half of the Volume indicator lights illuminate
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup

Note
if you disconnect the Exakt-link or do not have the Mains power going to the Series3-302 speaker and have the previously setup the Series3-301 for Stereo operation then you will only get one channel playback, (left channel only). The Series3-301 will assume that the other speaker still exists and has to be "'configured'" for Mono playback.




Bluetooth only setup

Bluetooth only

This setup will allow:
  • The Series3-301 as a Mono Bluetooth loudspeaker.
Series3-wiring-1Sp bluetooth.png
      Bt-scan-125px.gif‎ Bluetooth Setup procedure:
1. On the Series3-301, press and HOLD buttons PIN-3.png & PIN-4.png, until the volume indicator display starts it scan display
(More detail of the buttons and location can be found HERE
2. On your Bluetooth device, setup this up for pairing and look for Linn Series 3.
3. This Bluetooth pairing process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup


Bluetooth only with Stereo playback

This setup will allow:
  • The Series3-301 & Series3-302 as Stereo Bluetooth loudspeakers.
Series3-wiring-2Sp bluetooth.png

Configure for Bluetooth pairing

      Bt-scan-125px.gif‎ Bluetooth Setup procedure:
1. On the Series3-301, press and HOLD buttons PIN-3.png & PIN-4.png, until the volume indicator display starts it scan display
(More detail of the buttons and location can be found HERE
2. On your Bluetooth device, setup this up for pairing and look for Linn Series 3.
3. This Bluetooth pairing process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup Configure for use with Series3-302 partner speaker

      Series3-Configure-125px.gif‎ Add/Remove a Partner speaker setup procedure

(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) :

1. Connect or remove the Series3-302 speaker as required:
     * Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302
     * Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302
2. Press and HOLD both buttons PIN-1.png & PIN-6.png on the Series3-301 until half of the Volume indicator lights illuminate
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup

Note
if you disconnect the Exakt-link or do not have the Mains power going to the Series3-302 speaker and have the previously setup the Series3-301 for Stereo operation then you will only get one channel playback, (left channel only). The Series3-301 will assume that the other speaker still exists and has to be "'configured'" for Mono playback.




Wifi wiring & setup

Basic Wifi operation

This setup will allow:

  • Stream Music, using Wifi, to the Series3 speaker(s).
  • Optional Bluetooth loudspeaker operation is still available by initial setup of Bluetooth
Series3-wiring-Wifi.png
This is to setup the Wifi connection using the front panel buttons.
      Wifi-Scan-125px.gif WPS WIFI Setup procedure:
1. On your ISP Router, press the WPS button to start the connection process.
     * Check your Router manual on how start WPS pairing.
2. On the Series3-301 , press and HOLD buttons PIN-2.png & PIN-5.png until the volume indicators start moving to show a scan.
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.
Or
      Alternative Wifi Setup Method via Web Browser:
1. With the Series3-301 DSM out of Sleep mode
2. Go to the Wireless settings on your device (e.g. iPad)
3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number>
4. Select this as the wireless network on your device (e.g. iPad)
5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
6. The Series3 Wifi Setup page should now be displayed (if you get a "..cannot find the server” error then you have not selected to Series3 Wifi channel in point 3&4)
7. Select the Wifi network you want to connect to
8. Enter the passkey for the Wifi network
9. Click on 'Set Network'

Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons PIN-1.png, PIN-2.png & PIN-5.png for 2 seconds and this will forget your Wifi settings.


Wifi operation with TV audio and streaming

This setup will allow:

  • Mono TV audio from the TV HDMI-ARC socket
  • Stream Music, using cable ethernet, to the Series3 speaker(s).
  • Optional Bluetooth loudspeaker operation is still available by initial setup of Bluetooth
Series3-wiring-1Sp Wifi ARC.png


This is to setup the Wifi connection using the front panel buttons.
      Wifi-Scan-125px.gif WPS WIFI Setup procedure:
1. On your ISP Router, press the WPS button to start the connection process.
     * Check your Router manual on how start WPS pairing.
2. On the Series3-301 , press and HOLD buttons PIN-2.png & PIN-5.png until the volume indicators start moving to show a scan.
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.
Or
      Alternative Wifi Setup Method via Web Browser:
1. With the Series3-301 DSM out of Sleep mode
2. Go to the Wireless settings on your device (e.g. iPad)
3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number>
4. Select this as the wireless network on your device (e.g. iPad)
5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
6. The Series3 Wifi Setup page should now be displayed (if you get a "..cannot find the server” error then you have not selected to Series3 Wifi channel in point 3&4)
7. Select the Wifi network you want to connect to
8. Enter the passkey for the Wifi network
9. Click on 'Set Network'

Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons PIN-1.png, PIN-2.png & PIN-5.png for 2 seconds and this will forget your Wifi settings.


Wifi operation with Stereo TV audio and streaming

This setup will allow:

  • Stereo TV audio from the TV HDMI-ARC socket
  • Stereo streaming Music, using cable ethernet, to the Series3 speaker(s).
  • Optional Stereo Bluetooth loudspeaker operation is still available by initial setup of Bluetooth
Series3-wiring-2Sp ARC Wifi.png
This is to setup the Wifi connection using the front panel buttons.
      Wifi-Scan-125px.gif WPS WIFI Setup procedure:
1. On your ISP Router, press the WPS button to start the connection process.
     * Check your Router manual on how start WPS pairing.
2. On the Series3-301 , press and HOLD buttons PIN-2.png & PIN-5.png until the volume indicators start moving to show a scan.
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.
Or
      Alternative Wifi Setup Method via Web Browser:
1. With the Series3-301 DSM out of Sleep mode
2. Go to the Wireless settings on your device (e.g. iPad)
3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number>
4. Select this as the wireless network on your device (e.g. iPad)
5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
6. The Series3 Wifi Setup page should now be displayed (if you get a "..cannot find the server” error then you have not selected to Series3 Wifi channel in point 3&4)
7. Select the Wifi network you want to connect to
8. Enter the passkey for the Wifi network
9. Click on 'Set Network'

Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons PIN-1.png, PIN-2.png & PIN-5.png for 2 seconds and this will forget your Wifi settings.
Configure for use with Series3-302 partner speaker

      Series3-Configure-125px.gif‎ Add/Remove a Partner speaker setup procedure

(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) :

1. Connect or remove the Series3-302 speaker as required:
     * Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302
     * Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302
2. Press and HOLD both buttons PIN-1.png & PIN-6.png on the Series3-301 until half of the Volume indicator lights illuminate
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup



Cable network wiring & setup

Wired network operation

This setup will allow:

  • Stream Music, using cable ethernet, to the Series3 speaker(s).
  • Optional Bluetooth loudspeaker operation is still available by initial setup of Bluetooth
Series3-wiring-LAN.png
No top plate setup required

Wired network operation with TV audio and streaming

This setup will allow:

  • Mono TV audio from the TV HDMI-ARC socket
  • Stream Music, using cable ethernet, to the Series3 speaker(s).
  • Optional Bluetooth loudspeaker operation is still available by initial setup of Bluetooth
Series3-wiring-1Sp ARC.png
No top plate setup required




Wired network operation with Stereo TV audio and streaming

This setup will allow:

  • Stereo TV audio from the TV HDMI-ARC socket
  • Stereo streaming Music, using cable ethernet, to the Series3 speaker(s).
  • Optional Stereo Bluetooth loudspeaker operation is still available by initial setup of Bluetooth
Series3-wiring-2sp-LAN-ARC.png

Configure for use with Series3-302 partner speaker

      Series3-Configure-125px.gif‎ Add/Remove a Partner speaker setup procedure

(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) :

1. Connect or remove the Series3-302 speaker as required:
     * Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302
     * Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302
2. Press and HOLD both buttons PIN-1.png & PIN-6.png on the Series3-301 until half of the Volume indicator lights illuminate
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup


Wired network operation with LP12, TV audio and streaming, all in Stereo

This setup will allow:

  • Stereo TV audio from the TV HDMI-ARC socket
  • Stereo streaming Music, using cable ethernet or Wifi, to the Series3 speaker(s)
  • Stereo Bluetooth loudspeaker operation is still available by initial setup of Bluetooth
Series3-wiring-Stereo-Full KIT LP12.png

Positioning

Review the advised Positioning guide to ensure safe and cool operation of the Series3 speakers

Download App

Kazoo Playlist iPad.jpg

The Linn DS/DSM can be done from many control points at the same time.
Note: from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

The name of this control App/software is KAZOO..

Kazoo control App/software is available for
Windows Kazoo software download

| Windows Kazoo download
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

OSX Kazoo download

MAC OSX Kazoo download
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

Kazoo App - Google Play for Phone/Tablet Android Kazoo for Android Phone/Tablet download
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)



Setup and changes

There are two ways to configure, (if required), your Linn DS/DSM player/Speakers etc:

1. Web-browser App called Manage systems that can also be used on your Tablet:
Product page.jpg

Before you do anything you will need to have a Linn Account. This is a simple process and can only be performed using the Kazoo App or Linn App.
Details on how to create your Linn Account and how to use Manage systems can be found in the Manage Systems page.



2. Windows 10 PC or MAC OSX app called Konfig:
Configuration.png

This Konfig App can be downloaded from KONFIG App

This will allow changing the Room name, Linn DS/DSM name, input name and other settings. This can be changes by yourself and/or your Linn Retailer.

Details of most of the options are listed in the Konfig Manual, this covers many options

Konfig has been deprecated and replaced by Manage Systems.



Note: Manage Systems has taken over from Konfig and we would prefer you to use Manage Systems to setup an configure your Linn products.


Space Optimisation

SPACEOPTIMISATION Logo.jpg
for ALL Linn DS/DSM products
Linn Account Space Optimisation
Linn Account Space Optimisation
from Davaar64 ⇒
Konfig Space.png
Linn Konfig Space Optimisation
& Space Optimisation+

Linn Space Optimisation is currently configurable using either the Konfig app or the Linn Account Manage systems.

Click the above picture/icon for more information of that version of Space Optimisation.

More details of what Space Optimisation can be found can be found at www.Linn.co.uk

What are the differences between the Konfig Space Optimisation and Linn Account (Kloud Konfig) Space Optimisation?

The new version of Space Optimisation uses highly sophisticated acoustic modelling to model the interactions between your speakers and the room; this acoustic modelling is based on the finite-difference time-domain method. A simple two-dimensional analogy to this method of acoustic modelling is of a fishing net laid over a pond; each knot in the net defines a discrete measurement location, so that when a stone is thrown into the pond, we can track the resulting ripple by measuring its height at each knot.
The spatial discretisation employed by this method of acoustic modelling allows the new version of Space Optimisation to correctly consider the effects of:
  • non-rectangular rooms;
  • the placement of features like doors and windows;
  • And the location and rotation of your speakers.
Furthermore, the time-domain formulation of this method of acoustic modelling means that the new version of Space Optimisation can now reduce both the energy and decay time of any artificial distortions caused by the interactions between your speakers and the room, resulting in both a flat frequency response and a uniform decay time. :Finally, the new version of Space Optimisation has been designed to give a better balance of low- and mid-frequency energy.

What is the difference between Space Optimisation & Space Optimisation+?

This is applicable to both Linn Konfig and Manage System/Kloud Konfig
Space Optimisation is for NON-Exakt systems. This uses the direct analogue outputs of the Linn DS/DSM
Space Optimisation+ is for Exakt speaker. This is used for loudspeakers fed via the Exakt-link AND used with as a digital crossover.
The "plus" is to signify the more musical detail that is capable within the Exakt system and Space Optimisation due to timing control of each individual drive unit etc. (This is not possible with non-Exakt systems as the loudspeaker is only driven by one common audio feed per channel.)

Is the Linn Account Manage systems only available for the new Linn DSM's

Both Applications can be used for ALL Linn Products.
The only limitation is that the Linn DS/DSM must have Davaar64 to run Linn Account Manage systems]

Why don't you use a Microphone in Space Optimisation?

The aim of Space Optimisation is to remove the effects of your room, to uncover the unique acoustic characteristics of your speakers; after all, this is what you fell in love with when buying your speakers. To achieve this, Space Optimisation needs to understand both the interactions between your speakers and the room and the unique acoustic characteristics of your speakers; the unique acoustic characteristics of your speakers are then subtracted from the interactions between your speakers and the room, leaving only the effects of your room.

An acoustic measurement of the interactions between your speakers and room can have many sources of error which may affect the accuracy and repeat-ability of the measurement, including the choice of measurement stimulus, such as MLS or a log chirp; external noise, such as traffic noise and vibration; quality and calibration of the microphone, which can introduce distortion; and the microphone location, which can be sensitive to within a few centimetres. The use of acoustic modelling removes these sources of error: the model can apply an ideal impulse as stimulus; the modelling domain is free from noise; the model can use an ideal microphone; and the listening location is well-defined. It can thus be seen that acoustic modelling has a clear advantage over acoustic measurement in understanding the interactions between your speaker and the room.

The unique acoustic characteristics of your speakers depend on many factors, including the shape and size of the drive units and ports; the constructive and destructive interference between the drive units, ports and any cabinet-edge diffraction sources; and the angle between the listening location and your speakers. Therefore, a simple on-axis anechoic measurement of your speakers is insufficient information; what is actually required is an anechoic measurement with your speakers in the same configuration as you have them in your home. While some manufacturers do publish anechoic measurements of their speakers, both on- and off-axis, it is extremely unlikely that they will have performed an anechoic measurement of your speakers in the same configuration as you have them in your home. The acoustic modelling of such a scenario is, however, straightforward; the model can simply turn your room into an anechoic chamber to obtain the unique acoustic characteristics of your speakers in the same configuration as you have them in your home. It can thus be seen that acoustic modelling once again has a clear advantage over acoustic measurement in understanding the unique acoustic characteristics of your speakers.


From the above, it is clear that acoustic modelling is the best approach to Space Optimisation.



Can I use "Linn Account Space Optimisation" with my Exakt system?

From November 2019 you can now use Linn Account Space Optimisation with Stereo and Surround Exakt systems.




Series3-301 Touch Interface

Top plate buttons.png
Buttons keys
Any Button - Wake Series3 301 from Standby/Sleep
  1. PIN-1.pngSelect the Favourite media/PIN# 11 or setup Self configure with button6Self Configure
  2. PIN-2.pngSelect the Favourite media/PIN# 21 or setup WiFi with button5WPS Wifi Setup
  3. PIN-3.pngSelect the Favourite media/PIN# 31 or setup Bluetooth with button4Bluetooth Setup
  4. PIN-4.pngSelect the Favourite media/PIN# 41 or setup Bluetooth with button3Bluetooth Setup
  5. PIN-5.pngSelect the Favourite media/PIN# 51 or setup WiFi with button2WPS Wifi Setup
  6. PIN-6.pngSelect the Favourite media/PIN# 61 or setup Self configure with button1Self Configure
  7. Volume DOWN2 - decrease volume
  8. Volume UP 2 - increase volume
  9. Multifunction button3: Pause/Play, Mute/Unmute, Standby


Notes
1. FAVOURITE/'PIN BUTTONS1 - Personalised media selection Pins 1-6
Click for more....

PIN-1.pngPIN-2.pngPIN-3.pngPIN-4.pngPIN-5.pngPIN-6.png

1 A quick press of this button will select your PIN. For more information on PINS check the FAQ-What is a PIN
2. Volume button action2
Click for more....
Quick press/Tap action
  • Increment or decrement the volume level by one step.
Press and HOLD
  • continuously Increment or decrement the volume level until button has the volume level has reached 0 or maximum level.
3. Multifunction button3 - Play/Pause, Mute/Umute, Standby
Click for more....
Quick press/Tap action
  • Toggle between Pause/Play if you are playing a Music stream such as a Playlist, Tidal, Qobuz, Spotify
  • Toggle between Mute/UnMute if you are playing a Radio station, HDMI ARC input or Bluetooth connection
Press and HOLD
  • Go into Standby/Sleep mode
Self Configure -Configure for use with or without Series3-302 speaker
Click for more....
      Series3-Configure-125px.gif‎ Add/Remove a Partner speaker setup procedure

(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) :

1. Connect or remove the Series3-302 speaker as required:
     * Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302
     * Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302
2. Press and HOLD both buttons PIN-1.png & PIN-6.png on the Series3-301 until half of the Volume indicator lights illuminate
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup


WPS Wifi Setup -Initial setup for use with your Wifi using WPS
Click for more....
This is to setup the Wifi connection using the front panel buttons.
      Wifi-Scan-125px.gif WPS WIFI Setup procedure:
1. On your ISP Router, press the WPS button to start the connection process.
     * Check your Router manual on how start WPS pairing.
2. On the Series3-301 , press and HOLD buttons PIN-2.png & PIN-5.png until the volume indicators start moving to show a scan.
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.
Or
      Alternative Wifi Setup Method via Web Browser:
1. With the Series3-301 DSM out of Sleep mode
2. Go to the Wireless settings on your device (e.g. iPad)
3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number>
4. Select this as the wireless network on your device (e.g. iPad)
5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
6. The Series3 Wifi Setup page should now be displayed (if you get a "..cannot find the server” error then you have not selected to Series3 Wifi channel in point 3&4)
7. Select the Wifi network you want to connect to
8. Enter the passkey for the Wifi network
9. Click on 'Set Network'

Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons PIN-1.png, PIN-2.png & PIN-5.png for 2 seconds and this will forget your Wifi settings.

Bluetooth Setup -Initial setup to pair up your Bluetooth device, (iPhone, iPad, Alexa Echo, Android...), to the Series3-301
Click for more....
      Bt-scan-125px.gif‎ Bluetooth Setup procedure:
1. On the Series3-301, press and HOLD buttons PIN-3.png & PIN-4.png, until the volume indicator display starts it scan display
(More detail of the buttons and location can be found HERE
2. On your Bluetooth device, setup this up for pairing and look for Linn Series 3.
3. This Bluetooth pairing process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup

Series3 Touch Interface notifications

Top plate indicator.png
10. Volume indicator
Click for more....
. Primarily the outer ring is the volume level indicator.
This also has other indications:
      Series3-startup-125px.gif ⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either
      ⁃ Starting up, this typically takes 20-40seconds, or
      ⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket Exakt-Sender.png)



      Pin-Select-NoVol-125px.gif ⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected



      Bt-scan-125px.gif Bluetooth scan in progress



      Wifi-Scan-125px.gif WiFi scan in progress
11. Linn icon
Click for more....
Top-Plate notifications-Close-UnMute.png


Normal operation with the Series 3 playing music






Top-Plate notifications.png


Linn symbol has a lower brightness level the Series3 speakers are MUTED






Exakt-Wakeup-125.gif Linn symbol flashing shows that the Series 3 searching for a partner Series3 speaker



Top-Plate notifications-NoNetwork.png

If you do not have a live Wifi/network/LAN connection to the Series 3 then the Linn symbol on the dial will go red.
If you select the HDMI-ARC input or Bluetooth to the Series 3 speaker this red light will go out

If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket and NOT the Exakt socket.





Control of the Linn DS/DSM using a PC/MAC/Tablets & Phones

Initial installation

Linn App
Linn App Searc.png

The Linn DS/DSM can be done from many control points at the same time.

The name of this control App/software is Linn App


Linn App - iPhone/iPad Apple App store - Linn App for iPhone / iPad
        or
Linn App - Google Play for Phone/Tablet Google Play - Linn App for Android Phone/Tablet


Kazoo (Aug 2023 - Ceased all development)
Kazoo Playlist iPad.jpg

The Linn DS/DSM can be done from many control points at the same time.
Note: from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

The name of this control App/software is KAZOO..

Kazoo control App/software is available for
Windows Kazoo software download

| Windows Kazoo download
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

OSX Kazoo download

MAC OSX Kazoo download
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

Kazoo App - Google Play for Phone/Tablet Android Kazoo for Android Phone/Tablet download
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)



Using the Linn DS/DSM control software

For full operation of Kustom DSM you will need to use Linn App and/or Kazoo 4.13.64 >

As you can see from the above section there are multiple software/Apps for different control devices. Although Kazoo has the same style of control in each device, there are minor differences depending on what your control device is. This is why we have different Manuals.
These manuals should only be used as a basic guide for what the buttons can do. We would recommend just using the App/Software and only using the guide if you are having difficulty or want to see what more features are available.

These guides may show some features that are not available, or not have not be configured to work in your system. If you required more information then please contact your Retailer or Linn Support Site


iPad / iPhone / Android Linn App


Windows Kazoo
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)
MAC/MACBook Kazoo
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)
up to Yosemite (OSX 10.10)]
El Capitan (10.11 >)


iPad/iPhone Kazoo
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)


Android Kazoo
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

FEATURES

Wifi

Wifi.png Wifi Specification

Supports IEEE 802.11a/b/g/n/ac PSK/CCMP 1-CH
[ 2.4G (b/g) & 5G (n) Standards]

Bluetooth

Bluetooth-icon.pngBluetooth Specification

Reception of Bluetooth Audio: Series 3, Selekt DSM, Majik DSM (2020 variant) & Klimax DSM (2020 variant) implements Bluetooth v4.2

  • Audio is transferred using SBC encoding
  • This is not natively compatible with Googlecast.

This is a recent update and available on the Series3-301, Selekt DSM (running Davaar 75+ firmware) and Klimax DSM/3 (2020 Variant), Majik DSM (2020 variant) products

Single or Stereo operation

The Series3-301 can be configured for Single playback. (This is when left and right hand channel audio is mixed together to give one speaker)
Or connect a Series3-302 partner speaker for Stereo playback. (One speaker for Left hand channel and one speaker for Right hand channel)
The Series3-302 partner speaker requires its own mains power cable and a CAT-5 Exakt-link cable to hook up to the Series3-301

Example:

Series3-wiring-2sp-LAN-ARC.png

Configure for use with Series3-302 partner speaker

      Series3-Configure-125px.gif‎ Add/Remove a Partner speaker setup procedure

(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) :

1. Connect or remove the Series3-302 speaker as required:
     * Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302
     * Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302
2. Press and HOLD both buttons PIN-1.png & PIN-6.png on the Series3-301 until half of the Volume indicator lights illuminate
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup

Check Setup > Wiring for more example

HDMI ARC

HDMI Audio Return Channel is the audio returned from the same HDMI cable feeding A/V to the television.
This is only supported on the HDMI-2 board and on the Selekt DSM and on the Series 3.

This input can ONLY be used with a television. If any other HDMI source is connected to this input, then no audio will occur. (The HDMI ARC communication is different to standard HDMI communications)
This HDMI ARC input is declared as a separate input on the Linn DSM/HUB control. This can be set to automatically switch to this HDMI-ARC input when you have just switched on your television. More information on how to set this up are in the Konfig manual

General limitations with ARC are that it doesn't communicate with the playback device, in this case the Linn DSM, what Surround formats that it supports, if any. You need to check within the TV setup that the HDMI-ARC connection will only output in a format/codec that the Linn DSM will support. (2-ch/stereo PCM for a standard Linn DSM/HUB and 5.1ch Surround sound for one with a Linn Surround module).
This does NOT support DSD audio

Exakt

Exakt logo black.jpg

Exakt technology has enabled Linn to completely revolutionise the design and manufacture of music systems. Extending the lossless digital signal path further than ever before, Exakt eliminates sources of noise and distortion that exist in the traditional analogue hi-fi chain.

Exakt turns the loudspeaker into an intelligent, connected, software-upgradeable product. This enables a wide range of performance- and personalisation-enhancing capabilities, guaranteeing a performance that eliminates distortion, corrects for variation and is personalised for your home.

Exakt-links connects the Linn DS/DSM to the Exakt speaker/Tunbox via a single CAT5 cable. This single cable will transport 8 channels of audio and sync information to ensure that all channel playback is in perfect timing.


Back Home.png