Klimax Exakt System
Contents
SYSTEM INFORMATION
- Product Name: KLIMAX EXAKT DSM & KLIMAX EXAKT 350
- Date of Introduction: SEPTEMBER 2013
- Features EXAKT TECHNOLOGY
KLIMAX EXAKT DSM
Back Panel
- ANALOGUE IN RIGHT, LEFT - To connect sources with phono outputs.
- BALANCED IN RIGHT, LEFT - To connect sources with balanced (XLR) outputs.
- EXAKT LINK- To connect to Exakt compatible devices
- SPDIF IN - To connect sources with Spdif digital outputs.
- ETHERNET - To connect to a network.
- TOSLINK IN- To connect sources with Toslink (optical) digital outputs.
- MAINS INPUT - To connect to the mains electricity supply.
- FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
- HDMI IN 1, 2, 3 - To connect sources with HDMI outputs.
- HDMI OUT - To connect to a display device with HDMI inputs.
LED Status
Each of the Exakt Link ports have two status LED's. The function of these LED's is given below:
|
LED |
ON |
OFF |
Flash / Blink |
| LED0 | Link Port Disabled | Link Port Enabled | n/a |
| LED1 | No Link | Product Discovered | Activity |
KLIMAX EXAKT 350
Back Panel
- MAINS INPUT - To connect to the mains electricity supply.
- POWER SWITCH - To connect sources with phono outputs.
- FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
Note: The LED behind the Fallback indicates the Exakt Link is active but the product is not powered/switched off. - EXAKT LINK - From Exakt Master OR from a Exakt Slave connected to the Exakt master
- EXAKT LINK - To Exakt Slave product
- STATUS INDICATORS - Function of the LED's are given below:
LED Status
|
LED |
ON |
OFF |
Flash / Blink |
| 0 Master Port | No Link | Link Discovered | Link Activity |
| 1 Audio Clock | No Clock | Clock locked | Clock not locked |
| 2 Slave Port | No Link | Link Enabled | Link Activity |
| 3 Software Status | Not Configured | Running | Hardware Fault |
KLIMAX EXAKT TUNEBOX
Back Panel
- MAINS INPUT - To connect to the mains electricity supply.
- EXAKT LINK- To connect to Exakt compatible devices
- BALANCED OUTPUT 1 - 6 - To connect to power amplifiers.
- FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
LED Status
|
LED |
ON |
OFF |
Flash / Blink |
| 0 Master Port | No Link | Link Discovered | Link Activity |
| 1 Audio Clock | No Clock | Clock locked | Clock not locked |
| 2 Slave Port | No Link | Link Enabled | Link Activity |
| 3 Software Status | Not Configured | Running | Hardware Fault |
Connecting to Amplifiers / Speakers
EXAKT speaker and tunebox LED states
The blue LED on the front of the Exakt 350 or Exakt Tunebox provides the following information.
|
Dim/Red |
Bright/Blue |
Status |
| Off | Off | No Power |
| Off | On | Active |
| On | Off | Standby (not implemented) |
| On | On | Invalid State |
| Off | Slow Flash | Discovering |
| Off | Fast Flash | Configuring |
| Fast Flash | Off | Hardware Fault |
| Slow Alternating Flash | Slow Alternating Flash | Fallback |
| Fast Alternating Flash | Fast Alternating Flash | Reflashing |
EXAKT LINK Connections
Cables
Exakt Link uses readily available network cables:
- CAT 5 UTP/FTP
- CAT 6 UTP/FTP
Note: There is no change in the audio performance of the Exakt Link between Cat 5 or Cat 6 Cables.
Configurations
Exakt Systems can be configured either a star from the system master or as a daisy chain configuration. Examples of each configuration is shown below.
Note: There is no change in audio performance between the star configuration or the daisy chain configuration.
EXAKT Setup and Optimisation
One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Exakt Optimisation instructions & Exakt Optimsation
