Template:119

Linn 119 loudspeaker

Product info

• Product Name: 119

• Date of Introduction: September 2024
• Type: 2-way passive bookshelf loudspeaker

With Exakt option with either the Linn Selekt DSM or an Exaktbox.

• Features
  • Excellent linear performance and excursion
  • Electro-formed Linn logo tweeter guard
  • Lower-order crossovers for signal purity
  • Rear-ported design delivers high-performance bass
  • Bass augmentation filter further improves bass performance when fed from a Linn DSM
  • Optional black or silver pedestal stand
  • Optional wall-mount brackets
  • Optional Exakt configuration

Manuals

Safety Information

Warranty Terms & Conditions

Linn Support Site

Installation

We recommend that your 119 loudspeakers are unpacked, installed and adjusted by an authorised Linn retailer.
To get the best from your 119 loudspeakers, it is important that they be positioned and levelled correctly.

Due to the ferro drive units we recommend that the loudspeaker is

Positioning

As with any stereo loudspeaker, there are some fundamental principles which should be observed to get the best sound from your loudspeakers.

• The loudspeakers should be placed at an equal distance from the wall behind the loudspeakers.
• The speakers should be a similar (not the same) distance from the walls to the outside of each loudspeaker.
• Any toe-in applied should be the same for each loudspeaker.
• The loudspeakers should be level with all four spikes in contact with the floor. Use Linn Skeets for hard floors.

For further assistance, try our customer support pages

Connections

Single wiring

Bi-Wire

Exakt

This should be installed and adjusted by an authorised Linn retailer.

The loudspeaker will need to be converted for Aktiv operation and connected to either:

• An Exaktbox or
• A Selekt DSM with 2 cartridges (each with its own DAC).

Note: There are no Aktiv cards available for the 119 loudspeaker. i.e. Aktiv crossover cards that fit with the the Linn Power Amplfiier.

The 119 can ONLY be setup Aktively with the two Selekt DSM cartridges or an Exaktbox.

Technical Specifications

	Linn 119 Loudspeaker
Overview	Product Name: 119 Date of Introduction: September 2024 Type: 2-way passive bookshelf loudspeaker With Exakt option with either the Linn Selekt DSM or an Exaktbox.
Dimensions	(H) 328 mm x (W) 191 mm x (D) 241 mm (H) 12.9 inches x (W) 7.5 inches x (D) 9.5 inches Optional stand dims (H) 570mm x (W) 246mm x (D) 316mm (H) 22.45 inches x (W) 9.7 inches x (D) 12.5 inches
Weight	7.15 kg / 15.8 lb each
Drive Units	Tweeter: 19.55mm soft Sonomex dome; large ferrite magnet; voice coil in ferrofluid Bass: 16cm with Nextel-coated paper diaphragm; large ferrite magnet motor system with high linear excursion
Operating volume	9L
Nominal Impedance	4Ω
Bass System	Rear-ported
Binding posts	2pairs
Sensitivity	86dB
Frequency response	50 Hz to >20 kHz +/- 3 dB
Finishes	Walnut, Oak, Black, White