Template:Setup:Selekt Edition Sub

From LinnDocs
Revision as of 14:40, 26 September 2024 by Yoda (talk | contribs)
Jump to: navigation, search

This will ONLY work in Stereo configurations. This cannot be used in Surround Playback or Exakt loudspeakers.

These outputs are to give Stereo music enhancement on the Selekt DSM Edition or Classic/1using the Selekt cartridges for L+R feed and using generic filters for the Sub Output. (Due to timing issues, it does NOT work properly with Exakt connected speakers.)
Examples

Edition with Stereo SubOut.png- Edition with Mono-SubOut1.png

In Manage Systems - Output options
This is for use with Stereo playback only. If you have a Selekt cartridge configured for LFE Surround and your Subwoofer has two inputs, you can fed one input from the LFE output and the other Sub-woofer input from the SUBOUT output.
MS SelektEditionSubwoofer.png
Subwoofer
Options:
* ENABLED to enable these back panel outputs.
* DISABLED to disable these back panel outputs.


Subwoofer Filter
  • Enabled SUBOUT L+R set by crossover frequency 60Hz, 80Hz, 120Hz .
  • Disabled SUBOUT L+R crossover frequency 1kHz, the LHC/RHC audio is flat.


Subwoofer Crossover Frequency
If Subwoofer filter is enabled:
  • 60 Crossover frequency 60Hz
  • 80 Crossover frequency 80Hz
  • 1200 Crossover frequency 120Hz


Subwoofer Crossover Type
  • Bass redirect Audio above the Subwoofer Crossover Frequency frequency is sent to the F+R cartridge(s) and Exakt speakers. (Audio below this frequency is redirected to the SUBOUT outputs.)
  • Bass Reinforcement Audio to the F+R cartridge(s) and Exakt speakers is flat response..


Subwoofer Channels
  • Mono L+R subwoofer combined into one output.
  • Stereo separate LHC and RHC subwoofer outputs


Notes
  • Only works with Stereo playback
  • Only works correctly when the FL+FR speakers are from the Selekt Cartridge(s). It does not work reliably with Exakt connected loudspeakers.
  • Does NOT work with DSD playback


Option for Subwoofer operation in both Stereo and Surround Playback

If you have a Subwoofer with TWO Line inputs, you can:
1. Set up the Selekt Cartridge, or Exaktbox, for Surround LFE channel.
2. Then set up the Selekt Edition or Classic/1 Subwoofer Output
3. Connect the Surround LFE channel to one input of the Subwoofer
4. Connect the Selekt Edition or Classic/1 Subwoofer SubOut, L or R, to another input of the Subwoofer.
This will give you the subwoofer operation in Stereo playback and Surround LFE channel playback playing surround.

Example:

SelektEd LFE MONO SubOut.png