Template:Setup:Selekt Edition Sub
This will ONLY work in Stereo configurations. This cannot be used in Surround Playback.
- These outputs are to give Stereo music enhancement on the Selekt DSM Edition using the Selekt cartridges for L+R feed and using generic filters for the Sub Output.
- Examples
-
- In Manage Systems - Output options
- This is for use with Stereo playback only. If you have a Selekt cartridge configured for LFE Surround and your Subwoofer has two inputs, you can fed one input from the LFE output and the other Sub-woofer input from the SUBOUT output.
![MS SelektEditionSubwoofer.png](/wiki/images/thumb/6/6a/MS_SelektEditionSubwoofer.png/400px-MS_SelektEditionSubwoofer.png)
- Subwoofer
- Options:
- * ENABLED to enable these back panel outputs.
- * DISABLED to disable these back panel outputs.
- Options:
- Subwoofer Filter
- Enabled SUBOUT L+R set by crossover frequency 60Hz, 80Hz, 120Hz .
- Disabled SUBOUT L+R crossover frequency 1kHz, the LHC/RHC audio is flat.
- Subwoofer Crossover Frequency
- If Subwoofer filter is enabled:
- 60 Crossover frequency 60Hz
- 80 Crossover frequency 80Hz
- 1200 Crossover frequency 120Hz
- If Subwoofer filter is enabled:
- Subwoofer Crossover Type
- Bass redirect Audio above the Subwoofer Crossover Frequency frequency is sent to the F+R cartridge(s) and Exakt speakers. (Audio below this frequency is redirected to the SUBOUT outputs.)
- Bass Reinforcement Audio to the F+R cartridge(s) and Exakt speakers is flat response..
- Subwoofer Channels
- Mono L+R subwoofer combined into one output.
- Stereo separate LHC and RHC subwoofer outputs
- Notes
-
- Only works with Stereo playback
- Does NOT work with DSD playback
- Option for Subwoofer operation in both Stereo and Surround Playback
- If you have a Subwoofer with TWO Line inputs, you can:
- 1. Set up the Selekt Cartridge, or Exaktbox, for Surround LFE channel.
- 2. Then set up the Selekt Edition Subwoofer Output
- 3. Connect the Surround LFE channel to one input of the Subwoofer
- 4. Connect the Selekt Edition Subwoofer SubOut, L or R, to another input of the Subwoofer.
- This will give you the subwoofer operation in Stereo playback and Surround LFE channel playback playing surround.
Example:
![SelektEd LFE MONO SubOut.png](/wiki/images/thumb/2/27/SelektEd_LFE_MONO_SubOut.png/400px-SelektEd_LFE_MONO_SubOut.png)